Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractDevelopment and validation of the sickle cell stress scale-adult    Next AbstractCurrent breathomics--a review on data pre-processing techniques and machine learning in metabolomics breath analysis »

PLoS One


Title:Effect of operating and sampling conditions on the exhaust gas composition of small-scale power generators
Author(s):Smits M; Vanpachtenbeke F; Horemans B; De Wael K; Hauchecorne B; Van Langenhove H; Demeestere K; Lenaerts S;
Address:"Research Group Sustainable Energy and Air Purification, Department of Bioscience Engineering, University of Antwerp, Antwerp, Belgium. marianne.smits@ua.ac.be"
Journal Title:PLoS One
Year:2012
Volume:20120319
Issue:3
Page Number:e32825 -
DOI: 10.1371/journal.pone.0032825
ISSN/ISBN:1932-6203 (Electronic) 1932-6203 (Linking)
Abstract:"Small stationary diesel engines, like in generator sets, have limited emission control measures and are therefore responsible for 44% of the particulate matter (PM) emissions in the United States. The diesel exhaust composition depends on operating conditions of the combustion engine. Furthermore, the measurements are influenced by the used sampling method. This study examines the effect of engine loading and exhaust gas dilution on the composition of small-scale power generators. These generators are used in different operating conditions than road-transport vehicles, resulting in different emission characteristics. Experimental data were obtained for gaseous volatile organic compounds (VOC) and PM mass concentration, elemental composition and nitrate content. The exhaust composition depends on load condition because of its effect on fuel consumption, engine wear and combustion temperature. Higher load conditions result in lower PM concentration and sharper edged particles with larger aerodynamic diameters. A positive correlation with load condition was found for K, Ca, Sr, Mn, Cu, Zn and Pb adsorbed on PM, elements that originate from lubricating oil or engine corrosion. The nitrate concentration decreases at higher load conditions, due to enhanced nitrate dissociation to gaseous NO at higher engine temperatures. Dilution on the other hand decreases PM and nitrate concentration and increases gaseous VOC and adsorbed metal content. In conclusion, these data show that operating and sampling conditions have a major effect on the exhaust gas composition of small-scale diesel generators. Therefore, care must be taken when designing new experiments or comparing literature results"
Keywords:*Electricity Metals/*analysis Nitrates/*analysis Vehicle Emissions/*analysis Volatile Organic Compounds/*analysis;
Notes:"MedlineSmits, Marianne Vanpachtenbeke, Floris Horemans, Benjamin De Wael, Karolien Hauchecorne, Birger Van Langenhove, Herman Demeestere, Kristof Lenaerts, Silvia eng 2012/03/24 PLoS One. 2012; 7(3):e32825. doi: 10.1371/journal.pone.0032825. Epub 2012 Mar 19"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 16-11-2024