Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

J Occup Environ Hyg




2023
    Chemical characterization of combustion engine exhaust and assessment of helicopter deck operator occupational exposures on an offshore frigate class ship 
    Estimation of Volatile Organic Compound Exposure Concentrations and Time to Reach a Specific Dermal Absorption Using Physiologically Based Pharmacokinetic Modeling 

2022
    Assessment of worker chemical exposures in California vape shops 
    "Airborne contamination during post-fire investigations: Hot, warm and cold scenes" 
    Volatile organic compound and particulate emissions from the production and use of thermoplastic biocomposite 3D printing filaments 
    A pilot study of total personal exposure to volatile organic compounds among Hispanic female domestic cleaners 
    Intra-workday fluctuations of airborne contaminant concentration and the time-weighted average 

2021
    Assessment of occupational exposure to nebulized isopropyl alcohol as disinfectant during aseptic compounding of parenteral cytotoxic drugs in cleanrooms 
    Assessment of home care aides' respiratory exposure to total volatile organic compounds and chlorine during simulated bathroom cleaning: An experimental design with conventional and 'green' products 
    Combustion products generated in simulated industrial fires 

2020
    Chemical permeation of similar disposable nitrile gloves exposed to volatile organic compounds with different polarities: Part 1: Product variation 
    Chemical permeation of similar disposable nitrile gloves exposed to volatile organic compounds with different polarities Part 2. Predictive polymer properties 
    "Biocidal spray product exposure: Measured gas, particle, and surface concentrations compared with spray model simulations" 
    Emissions associated with operations of four different additive manufacturing or 3D printing technologies 

2019
    "Occupational exposure to gaseous and particulate contaminants originating from additive manufacturing of liquid, powdered, and filament plastic materials and related post-processes" 
    Understanding airborne contaminants produced by different fuel packages during training fires 
    Cleaning workers' exposure to volatile organic compounds and particulate matter during floor polish removal and reapplication 
    "Robotic direct reading device with spatial, temporal, and PID sensors for laboratory VOC exposure assessment" 
    Pilot study on the efficiency of water-only decontamination for firefighters' turnout gear 
    Exposures to air contaminants in compartment fire behavior training (CFBT) using particleboard fuel 
    Particle and vapor emissions from vat polymerization desktop-scale 3-dimensional printers 
    Targeted GC-MS analysis of firefighters' exhaled breath: Exploring biomarker response at the individual level 
    Breakthrough analysis for filtering facepiece respirators impregnated with activated carbon 

2018
    Airborne contaminants during controlled residential fires 
    "Evaluation of a portable gas chromatograph with photoionization detector under variations of VOC concentration, temperature, and relative humidity" 
    An indoor air quality evaluation in a residential retrofit project using spray polyurethane foam 
    Surgical smoke control with local exhaust ventilation: Experimental study 
    Occupational exposures of flour dust and airborne chemicals at bakeries in Taiwan 
    Work environment and occupational risk assessment for small animal Portuguese veterinary activities 
    Assessing indoor air quality in New York City nail salons 
    "Firefighter attitudes, norms, beliefs, barriers, and behaviors toward post-fire decontamination processes in an era of increased cancer risk" 

2017
    Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer 
    Fume emissions from a low-cost 3-D printer with various filaments 
    Center for the Polyurethanes Industry summary of unpublished industrial hygiene studies related to the evaluation of emissions of spray polyurethane foam insulation 
    "Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon" 
    Identifying thermal breakdown products of thermoplastics 
    Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures 

2016
    Development of the chemical exposure monitor with indoor positioning (CEMWIP) for workplace VOC surveys 
    Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings 
    Predicting the lifetime of organic vapor cartridges exposed to volatile organic compound mixtures using a partial differential equations model 
    Dangerous (toxic) atmospheres in UK wood pellet and wood chip fuel storage 
    Investigating a persistent odor at an aircraft seat manufacturer 
    Evaluation of a passive optical based end of service life indicator (ESLI) for organic vapor respirator cartridges 
    Hexavalent chromium and isocyanate exposures during military aircraft painting under crossflow ventilation 
    Risk assessment of soils identified on firefighter turnout gear 

2015
    Volatile Organic Compounds Off-gassing from Firefighters' Personal Protective Equipment Ensembles after Use 
    Occupational exposure assessment of highway toll station workers to vehicle engine exhaust 
    The effects of aging on the dynamic adsorption of hazardous organic vapors on impregnated activated carbon 
    Structural Fire Fighting Ensembles: Accumulation and Off-gassing of Combustion Products 

2014
    Evaluation of a smoke-free law on indoor air quality and on workers' health in Portuguese restaurants 
    Exposure to chlorpyrifos in gaseous and particulate form in greenhouses: a pilot study 
    Evaluation of some potential chemical exposure risks during flowback operations in unconventional oil and gas extraction: preliminary results 

2013
    Developing a new simplified method to determine diffusive uptake rates of volatile organic compounds in workplaces based on a fractional factorial designs approach 
    Potential exposures associated with indoor marijuana growing operations 
    A new approach for diffusive sampling based on SPME for occupational exposure assessment 
    Inhalation exposure to cleaning products: application of a two-zone model 

2012
    Evaluating a persistent nuisance odor in an office building 
    Pilot study of aromatic hydrocarbon adsorption characteristics of disposable filtering facepiece respirators that contain activated carbon 
    Exposure to airborne methacrylates in nail salons 
    Characterization and evolution of exposure to volatile organic compounds in the Spanish shoemaking industry over a 5-year period 
    Volatile organic compounds in headspace over electrical components at 75 to 200 degrees C - part 1. identification of constituents and emission rates 

2011
    Case Study: Deepwater horizon response workers exposure assessment at the source: MC252 well No. 1 
    Identification and measurement of diacetyl substitutes in dry bakery mix production 

2010
    "Permeation of gasoline, diesel, bioethanol (E85), and biodiesel (B20) fuels through six glove materials" 
    A proposal for calculating occupational exposure limits for volatile organic compounds acting as sensory irritants on the basis of their physicochemical properties 

2009
    Development of air sampling strategies for monitoring common air pollutants in a mission area at Camp Victoria in Kosovo--stationary vs. personal monitoring 
    Implementing safer alternatives to lithographic cleanup solvents to protect the health of workers and the environment 
    "Airborne concentrations of volatile organic compounds, formaldehyde and ammonia in Finnish office buildings with suspected indoor air problems" 
    Volatile organic compounds and formaldehyde as explaining factors for sensory irritation in office environments 

2008
    "Exposure to wood dust, resin acids, and volatile organic compounds during production of wood pellets" 

2007
    Worker exposure to volatile organic compounds in the vehicle repair industry 
    Application of ultraviolet spectrophotometry to estimate occupational exposure to airborne polyaromatic compounds in asphalt pavers 

2006
    "Behavior of the GABIE, 3M 3500, PerkinElmer Tenax TA, and RADIELLO 145 diffusive samplers exposed over a long time to a low concentration of VOCs" 
    Diacetyl emissions and airborne dust from butter flavorings used in microwave popcorn production 

2005
    Characterization of respiratory exposures at a microwave popcorn plant with cases of bronchiolitis obliterans 
    Assessing truck driver exposure at the World Trade Center disaster site: personal and area monitoring for particulate matter and volatile organic compounds during October 2001 and April 2002 

2004
    Exposure to and acute effects of medium-density fiber board dust 
    A novel personal air sampling device for collecting volatile organic compounds: a comparison to charcoal tubes and diffusive badges 
    Effectiveness of personal protective equipment: relevance of dermal and inhalation exposure to chlorpyrifos among pest control operators 

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 25-12-2024