2023

Chemical characterization of combustion engine exhaust and assessment of helicopter deck operator occupational exposures on an offshore frigate class ship

Estimation of Volatile Organic Compound Exposure Concentrations and Time to Reach a Specific Dermal Absorption Using Physiologically Based Pharmacokinetic Modeling

2022

Assessment of worker chemical exposures in California vape shops

"Airborne contamination during post-fire investigations: Hot, warm and cold scenes"

Volatile organic compound and particulate emissions from the production and use of thermoplastic biocomposite 3D printing filaments

A pilot study of total personal exposure to volatile organic compounds among Hispanic female domestic cleaners

Intra-workday fluctuations of airborne contaminant concentration and the time-weighted average

2021

Assessment of occupational exposure to nebulized isopropyl alcohol as disinfectant during aseptic compounding of parenteral cytotoxic drugs in cleanrooms

Assessment of home care aides' respiratory exposure to total volatile organic compounds and chlorine during simulated bathroom cleaning: An experimental design with conventional and 'green' products

Combustion products generated in simulated industrial fires

2020

Chemical permeation of similar disposable nitrile gloves exposed to volatile organic compounds with different polarities: Part 1: Product variation

Chemical permeation of similar disposable nitrile gloves exposed to volatile organic compounds with different polarities Part 2. Predictive polymer properties

"Biocidal spray product exposure: Measured gas, particle, and surface concentrations compared with spray model simulations"

Emissions associated with operations of four different additive manufacturing or 3D printing technologies

2019

"Occupational exposure to gaseous and particulate contaminants originating from additive manufacturing of liquid, powdered, and filament plastic materials and related post-processes"

Understanding airborne contaminants produced by different fuel packages during training fires

Cleaning workers' exposure to volatile organic compounds and particulate matter during floor polish removal and reapplication

"Robotic direct reading device with spatial, temporal, and PID sensors for laboratory VOC exposure assessment"

Pilot study on the efficiency of water-only decontamination for firefighters' turnout gear

Exposures to air contaminants in compartment fire behavior training (CFBT) using particleboard fuel

Particle and vapor emissions from vat polymerization desktop-scale 3-dimensional printers

Targeted GC-MS analysis of firefighters' exhaled breath: Exploring biomarker response at the individual level

Breakthrough analysis for filtering facepiece respirators impregnated with activated carbon

2018

Airborne contaminants during controlled residential fires

"Evaluation of a portable gas chromatograph with photoionization detector under variations of VOC concentration, temperature, and relative humidity"

An indoor air quality evaluation in a residential retrofit project using spray polyurethane foam

Surgical smoke control with local exhaust ventilation: Experimental study

Occupational exposures of flour dust and airborne chemicals at bakeries in Taiwan

Work environment and occupational risk assessment for small animal Portuguese veterinary activities

Assessing indoor air quality in New York City nail salons

"Firefighter attitudes, norms, beliefs, barriers, and behaviors toward post-fire decontamination processes in an era of increased cancer risk"

2017

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer

Fume emissions from a low-cost 3-D printer with various filaments

Center for the Polyurethanes Industry summary of unpublished industrial hygiene studies related to the evaluation of emissions of spray polyurethane foam insulation

"Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon"

Identifying thermal breakdown products of thermoplastics

Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures

2016

Development of the chemical exposure monitor with indoor positioning (CEMWIP) for workplace VOC surveys

Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings

Predicting the lifetime of organic vapor cartridges exposed to volatile organic compound mixtures using a partial differential equations model

Dangerous (toxic) atmospheres in UK wood pellet and wood chip fuel storage

Investigating a persistent odor at an aircraft seat manufacturer

Evaluation of a passive optical based end of service life indicator (ESLI) for organic vapor respirator cartridges

Hexavalent chromium and isocyanate exposures during military aircraft painting under crossflow ventilation

Risk assessment of soils identified on firefighter turnout gear

2015

Volatile Organic Compounds Off-gassing from Firefighters' Personal Protective Equipment Ensembles after Use

Occupational exposure assessment of highway toll station workers to vehicle engine exhaust

The effects of aging on the dynamic adsorption of hazardous organic vapors on impregnated activated carbon

Structural Fire Fighting Ensembles: Accumulation and Off-gassing of Combustion Products

2014

Evaluation of a smoke-free law on indoor air quality and on workers' health in Portuguese restaurants

Exposure to chlorpyrifos in gaseous and particulate form in greenhouses: a pilot study

Evaluation of some potential chemical exposure risks during flowback operations in unconventional oil and gas extraction: preliminary results

2013

Developing a new simplified method to determine diffusive uptake rates of volatile organic compounds in workplaces based on a fractional factorial designs approach

Potential exposures associated with indoor marijuana growing operations

A new approach for diffusive sampling based on SPME for occupational exposure assessment

Inhalation exposure to cleaning products: application of a two-zone model

2012

Evaluating a persistent nuisance odor in an office building

Pilot study of aromatic hydrocarbon adsorption characteristics of disposable filtering facepiece respirators that contain activated carbon

Exposure to airborne methacrylates in nail salons

Characterization and evolution of exposure to volatile organic compounds in the Spanish shoemaking industry over a 5-year period

Volatile organic compounds in headspace over electrical components at 75 to 200 degrees C - part 1. identification of constituents and emission rates

2011

Case Study: Deepwater horizon response workers exposure assessment at the source: MC252 well No. 1

Identification and measurement of diacetyl substitutes in dry bakery mix production

2010

"Permeation of gasoline, diesel, bioethanol (E85), and biodiesel (B20) fuels through six glove materials"

A proposal for calculating occupational exposure limits for volatile organic compounds acting as sensory irritants on the basis of their physicochemical properties

2009

Development of air sampling strategies for monitoring common air pollutants in a mission area at Camp Victoria in Kosovo--stationary vs. personal monitoring

Implementing safer alternatives to lithographic cleanup solvents to protect the health of workers and the environment

"Airborne concentrations of volatile organic compounds, formaldehyde and ammonia in Finnish office buildings with suspected indoor air problems"

Volatile organic compounds and formaldehyde as explaining factors for sensory irritation in office environments

2008

"Exposure to wood dust, resin acids, and volatile organic compounds during production of wood pellets"

2007

Worker exposure to volatile organic compounds in the vehicle repair industry

Application of ultraviolet spectrophotometry to estimate occupational exposure to airborne polyaromatic compounds in asphalt pavers

2006

"Behavior of the GABIE, 3M 3500, PerkinElmer Tenax TA, and RADIELLO 145 diffusive samplers exposed over a long time to a low concentration of VOCs"

Diacetyl emissions and airborne dust from butter flavorings used in microwave popcorn production

2005

Characterization of respiratory exposures at a microwave popcorn plant with cases of bronchiolitis obliterans

Assessing truck driver exposure at the World Trade Center disaster site: personal and area monitoring for particulate matter and volatile organic compounds during October 2001 and April 2002

2004

Exposure to and acute effects of medium-density fiber board dust

A novel personal air sampling device for collecting volatile organic compounds: a comparison to charcoal tubes and diffusive badges

Effectiveness of personal protective equipment: relevance of dermal and inhalation exposure to chlorpyrifos among pest control operators