« Previous AbstractChemical differentiation of volatile compounds in crude and processed Atractylodis Macrocephalae Rhizoma by using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry combined with multivariate data analysis    Next AbstractAllelopathic effect of rhubarb extracts on the growth of Microcystis aeruginosa »

Environ Sci Technol

Title:		Inverse Problem Optimization Method to Design Passive Samplers for Volatile Organic Compounds: Principle and Application
Author(s):		Cao J; Du Z; Mo J; Li X; Xu Q; Zhang Y;
Address:		"Department of Building Science, Tsinghua University , Beijing 100084, China. Beijing Key Laboratory of Indoor Air Quality Evaluation and Control , Beijing 100084, China"
Journal Title:		Environ Sci Technol
Year:		2016
Volume:		20161206
Issue:		24
Page Number:		13477 - 13485
DOI:		10.1021/acs.est.6b04872
ISSN/ISBN:		1520-5851 (Electronic) 0013-936X (Linking)
Abstract:		"Passive sampling is an alternative to active sampling for measuring concentrations of gas-phase volatile organic compounds (VOCs). However, the uncertainty or relative error of the measurements have not been minimized due to the limitations of existing design methods. In this paper, we have developed a novel method, the inverse problem optimization method, to address the problems associated with designing accurate passive samplers. The principle is to determine the most appropriate physical properties of the materials, and the optimal geometry of a passive sampler, by minimizing the relative sampling error based on the mass transfer model of VOCs for a passive sampler. As an example application, we used our proposed method to optimize radial passive samplers for the sampling of benzene and formaldehyde in a normal indoor environment. A new passive sampler, which we have called the Tsinghua Passive Diffusive Sampler (THPDS), for indoor benzene measurement was developed according to the optimized results. Silica zeolite was selected as the sorbent for the THPDS. The measured overall uncertainty of THPDS (22% for benzene) is lower than that of most commercially available passive samplers but is quite a bit larger than the modeled uncertainty (4.8% for benzene, the optimized result), suggesting that further research is required"
Keywords:		*Air Pollutants Benzene Environmental Monitoring Formaldehyde *Volatile Organic Compounds;
Notes:		"MedlineCao, Jianping Du, Zhengjian Mo, Jinhan Li, Xinxiao Xu, Qiujian Zhang, Yinping eng Research Support, Non-U.S. Gov't 2016/12/21 Environ Sci Technol. 2016 Dec 20; 50(24):13477-13485. doi: 10.1021/acs.est.6b04872. Epub 2016 Dec 6"