| Title: | Graphite microparticles as coatings for quartz crystal microbalance-based gas sensors |
| Author(s): | Shinar R; Liu G; Porter MD; |
| Address: | "Microanalytical Instrumentation Center, Ames Laboratory-USDOE, and Department of Chemistry, Iowa State University, 50011, USA. rshinar@iastate.edu" |
| ISSN/ISBN: | 0003-2700 (Print) 0003-2700 (Linking) |
| Abstract: | "The use of graphite particles (1-2 microm) as coatings on quartz crystal microbalances (QCMs) for detection and monitoring of toluene and other volatile organic compounds (VOCs) is described. Unlike the more commonly used polymeric coatings with low glass transition temperatures (Tg), particulate graphitic coatings are not as susceptible to loss of acoustic energy when coating thickness or operational temperature increases. This situation enables the use of relatively thick coatings, which increases the absolute amount of vapor sorbed in the coating and, consequently, lowers the level of detection and enhances operation over a wide temperature range. The use of small size particles also results in a coating with a more porous structure, which facilitates uptake and release of VOCs in comparison to coatings made from high Tg polymers, which have a lower porosity. These attributes, coupled with the inherent stability of graphitic materials, make particulate graphite coatings especially suitable for applications at high temperatures. The advantages of using particulate graphite as a coating on QCMs are demonstrated by comparison to the performance of a few low-Tg polymers [i.e., poly(isobutylene) and poly(diphenoxyphosphazene)] and high-Tg polymers (i.e., polystyrene)" |
| Keywords: | Crystallization Environmental Monitoring/*instrumentation Gases/*analysis Graphite/*chemistry *Quartz Temperature Toluene/analysis; |
| Notes: | "MedlineShinar, R Liu, G Porter, M D eng Research Support, Non-U.S. Gov't Research Support, U.S. Gov't, Non-P.H.S. 2001/01/05 Anal Chem. 2000 Dec 15; 72(24):5981-7. doi: 10.1021/ac0009548" |
