| Title: | Quantification of VOCs and the development of odour wheels for rubber processing |
| Author(s): | Kamarulzaman NH; Le-Minh N; Fisher RM; Stuetz RM; |
| Address: | "School of Civil and Environmental Engineering, The University of New South Wales, Sydney, NSW 2052, Australia; Technology and Engineering Division, Malaysian Rubber Board, 50450 Kuala Lumpur, Malaysia. School of Civil and Environmental Engineering, The University of New South Wales, Sydney, NSW 2052, Australia. School of Civil and Environmental Engineering, The University of New South Wales, Sydney, NSW 2052, Australia. Electronic address: r.stuetz@unsw.edu.au" |
| DOI: | 10.1016/j.scitotenv.2018.11.451 |
| ISSN/ISBN: | 1879-1026 (Electronic) 0048-9697 (Linking) |
| Abstract: | "The impacts of rubber variations (clonal, seasonal, and pre-treatment) were investigated to assess changes in the composition of volatile organic compounds (VOCs) emitted during rubber processing. VOC emissions from 14 different rubber types were evaluated by headspace micro-chamber (mu-TEC) extraction coupled with gas chromatography-mass spectrometry (GC-MS). Headspace extracted at 120?ª+ degrees C, which is equivalent to the drying temperature during rubber processing, revealed a significant number of odorants in terms of concentrations as well as odorant type. Volatile fatty acids (VFAs) such as acetic, propanoic, butanoic, pentanoic and hexanoic acids, were frequently detected at concentrations greater than their odour detection thresholds. Other odorous compounds including trimethylamine, p-cresol, butanone, indole, and phenol, were also detected. Emissions collected at ambient conditions represent odorants released during material storage (or maturation) and were dominated by benzene derivatives followed by ketones, aldehydes, esters, and acids. Emission composition during storage appeared to be governed by specific rubber properties such as protein and rubber moisture content. Seasonal variations revealed greater impacts on the concentration of VOCs for all studied clones, compared to pre-treatment variations, suggesting that the VOCs composition was seasonally dependent and may represents the 'potential' emissions from rubber as they are processed. A combination of sensorial and analytical measurements were used to produce odour wheels which may be used as tool to identify key malodours in onsite rubber processing. The linking of odours and odorants can facilitate communication between receptors (the public) and plant operators inorder to minimise odour impact and develop effective abatement and on-site management practices" |
| Keywords: | Gc-ms Odour rubber wheels Odours Rubber emissions VOCs; |
| Notes: | "PubMed-not-MEDLINEKamarulzaman, Nor H Le-Minh, Nhat Fisher, Ruth M Stuetz, Richard M eng Netherlands 2018/12/14 Sci Total Environ. 2019 Mar 20; 657:154-168. doi: 10.1016/j.scitotenv.2018.11.451. Epub 2018 Dec 4" |
