Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractLow-temperature headspace-trap gas chromatography with mass spectrometry for the determination of trace volatile compounds from the fruit of Lycium barbarum L    Next Abstract"Catching Ips duplicatus (Sahlberg) (Coleoptera: Scolytidae) with pheromone-baited traps: optimal trap type, colour, height and distance to infestation" »

Ground Water


Title:Numerical Analysis of Thermal Remediation in 3D Field-Scale Fractured Geologic Media
Author(s):Chen F; Falta RW; Murdoch LC;
Address:"Department of Environmental Engineering & Earth Sciences, Clemson University, Clemson, SC 29634"
Journal Title:Ground Water
Year:2015
Volume:20140718
Issue:4
Page Number:572 - 587
DOI: 10.1111/gwat.12241
ISSN/ISBN:1745-6584 (Electronic) 0017-467X (Linking)
Abstract:"Thermal methods are promising for remediating fractured geologic media contaminated with volatile organic compounds, and the success of this process depends on the coupled heat transfer, multiphase flow, and thermodynamics. This study analyzed field-scale removal of trichloroethylene (TCE) and heat transfer behavior in boiling fractured geologic media using the multiple interacting continua method. This method can resolve local gradients in the matrix and is less computationally demanding than alternative methods like discrete fracture-matrix models. A 2D axisymmetric model was used to simulate a single element of symmetry in a repeated pattern of extraction wells inside a large heated zone and evaluate effects of parameter sensitivity on contaminant recovery. The results showed that the removal of TCE increased with matrix permeability, and the removal rate was more sensitive to matrix permeability than any other parameter. Increasing fracture density promoted TCE removal, especially when the matrix permeability was low (e.g., <10(-17) m(2)). A 3D model was used to simulate an entire treatment zone and the surrounding groundwater in fractured material, with the interaction between them being considered. Boiling was initiated in the center of the upper part of the heated region and expanded toward the boundaries. This boiling process resulted in a large increase in the TCE removal rate and spread of TCE to the vadose zone and the peripheries of the heated zone. The incorporation of extraction wells helped control the contaminant from migrating to far regions. After 22 d, more than 99.3% of TCE mass was recovered in the simulation"
Keywords:"Environmental Restoration and Remediation/*methods Geologic Sediments Groundwater/chemistry Hot Temperature *Models, Theoretical Trichloroethylene/*chemistry Water Pollutants, Chemical/*chemistry;"
Notes:"MedlineChen, Fei Falta, Ronald W Murdoch, Lawrence C eng Research Support, U.S. Gov't, Non-P.H.S. 2014/07/22 Ground Water. 2015 Jul-Aug; 53(4):572-87. doi: 10.1111/gwat.12241. Epub 2014 Jul 18"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 30-12-2024