Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractEmissions from oil and gas operations in the United States and their air quality implications    Next Abstract"Asian corn borer pheromone binding protein 3, a candidate for evolving specificity to the 12-tetradecenyl acetate sex pheromone" »

Environ Technol


Title:Evaluation of the biomethane yield from anaerobic co-digestion of nitrogenous substrates
Author(s):Allen E; Browne JD; Murphy JD;
Address:"Department of Civil and Environmental Engineering, University College Cork, Ireland"
Journal Title:Environ Technol
Year:2013
Volume:34
Issue:13-16
Page Number:2059 - 2068
DOI: 10.1080/09593330.2013.806564
ISSN/ISBN:0959-3330 (Print) 0959-3330 (Linking)
Abstract:"This paper examines three substrates for anaerobic co-digestion: abattoir waste; cheese waste and food waste. These substrates were assessed in detail for suitability for biomethane production. Biomethane potential (BMP) assays were carried out in mono and co-digestion for the three substrates and two mixes: T1 (40% abattoir waste; 50% cheese waste and 10% food waste on a wet weight basis) and T2 (30% abattoir waste; 40% cheese waste and 30% food waste). The C:N ratio of both mixes was below optimum. Low levels suggest that the production of free ammonia (NH3) in semi-continuous digestion was of primary concern. Both mixes were digested in a semi-continuous process for 25 weeks. The recommended operating condition for T1 was a loading rate of 3 kg VS mn(-3) day(-1) at a retention time of 23 days. The biomethane yield was 305 L CH4 kg(-1) volatile solids (VS) which was 87% of the BMP value and equivalent to 61% biodegradability. For T2 (with the higher C:N ratio) a higher loading rate of 4kg VS mn(-3) day(-1) at a lower retention time of 15 days was recommended. The biomethane yield was 439 L CH4 kg(-1) VS (99% of the BMP value and 84% biodegradibility). At these conditions, levels of total ammonical nitrogen (TAN) were 4109 and 4831 mg L(-1) for T1 and T2, respectively. These values are on the large side according to the literature. The temperature was reduced to 35 degrees C to minimize toxicity associated with TAN. Ratios of volatile acids to bicarbonate were typically in the range of 0.2-0.3 suggesting stable operation"
Keywords:"Ammonia/*metabolism Anaerobiosis *Biofuels Bioreactors Food Industry Hydrogen Sulfide/metabolism Industrial Waste Methane/*analysis/*metabolism *Sewage Temperature Volatile Organic Compounds/metabolism Waste Disposal, Fluid/*methods;"
Notes:"MedlineAllen, Eoin Browne, James D Murphy, Jerry D eng Research Support, Non-U.S. Gov't England 2013/12/20 Environ Technol. 2013 Jul-Aug; 34(13-16):2059-68. doi: 10.1080/09593330.2013.806564"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024