Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract[Allelopathy and resources competition of rice under different nitrogen supplies]    Next Abstract"C-history method: rapid measurement of the initial emittable concentration, diffusion and partition coefficients for formaldehyde and VOCs in building materials" »

Indoor Air


Title:Impact of temperature on the initial emittable concentration of formaldehyde in building materials: experimental observation
Author(s):Xiong J; Zhang Y;
Address:"Department of Building Science, Tsinghua University, Beijing, China"
Journal Title:Indoor Air
Year:2010
Volume:20
Issue:6
Page Number:523 - 529
DOI: 10.1111/j.1600-0668.2010.00675.x
ISSN/ISBN:1600-0668 (Electronic) 0905-6947 (Linking)
Abstract:"The initial emittable concentration of volatile organic compounds (VOC) is a key parameter not only in evaluating the 'green' degree of building materials but also in modeling their emission characteristics. Although the impact of temperature on initial emittable concentration is important, it has not been reported in the literature. Using the multi-emission/flush regression method we developed, the impact of temperature on the initial emittable concentration of formaldehyde in medium density board has been experimentally studied. It is observed that the initial emittable concentration increases significantly with increasing temperature. When the temperature rises by 25.4 degrees C, it increases by about 507%. However, the initial emittable concentration at room temperature is far less than the value measured by the perforator method recommended by the Chinese National Standard GB/T 17657-1999, which measures the total concentration of formaldehyde in medium density board. This means most of formaldehyde in the building material cannot emit out at room temperature. The results will be very helpful in estimating the emission characteristics of building materials at different temperatures as well as for developing green building materials. PRACTICAL IMPLICATIONS: Knowledge of initial emittable concentration is important for VOC emission prediction. According to our experimental study, the initial emittable concentration is heavily dependent on temperature, and this factor should be considered in dealing with heating or cooling process of building materials. The significant difference between the initial emittable concentration and total concentration suggests that the total concentration seems not appropriate for judging the pollution level of building materials"
Keywords:Construction Materials/*toxicity Formaldehyde/analysis/*chemistry *Temperature Volatilization;
Notes:"MedlineXiong, J Zhang, Y eng Research Support, Non-U.S. Gov't England 2010/11/13 Indoor Air. 2010 Dec; 20(6):523-9. doi: 10.1111/j.1600-0668.2010.00675.x"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024