Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractQuality and aromatic sensory descriptors (mainly fresh and dry fruit character) of Spanish red wines can be predicted from their aroma-active chemical composition    Next AbstractProfiling flavor compounds of potato crisps during storage using solid-phase microextraction »

J Environ Sci Health A Tox Hazard Subst Environ Eng


Title:Removal of acetone from air emissions by biotrickling filters: providing solutions from laboratory to full-scale
Author(s):San-Valero P; Gabaldon C; Alvarez-Hornos FJ; Izquierdo M; Martinez-Soria V;
Address:"a Research Group GI2AM, Department of Chemical Engineering , Universitat de Valencia , Burjassot , Spain"
Journal Title:J Environ Sci Health A Tox Hazard Subst Environ Eng
Year:2019
Volume:20180907
Issue:1
Page Number:1 - 8
DOI: 10.1080/10934529.2018.1496552
ISSN/ISBN:1532-4117 (Electronic) 1093-4529 (Linking)
Abstract:"A full-scale biotrickling filter (BTF) treating acetone air emissions of wood-coating activities showed difficulties to achieve outlet concentrations lower than 125 mg C m(-3), especially for high inlet concentrations and oscillating emissions. To solve this problem, a laboratory investigation on acetone removal was carried out simulating typical industrial conditions: discontinuous and variable inlet concentrations and intermittent spraying. The results were evaluated in terms of removal efficiency and outlet gas emission pattern. Industrial emissions and operational protocols were simulated: inlet load up to 70 g C m(-3) h(-1) during 2 cycles of 4 h per day and intermittent trickling of 15 min per hour. The outlet gas stream of the pollutant was affected by intermittent spraying, causing a fugitive emission of pollutant. Complete removal efficiency was obtained during non-spraying. Average removal efficiencies higher than 85% were obtained, showing the feasibility of BTF to treat acetone. The outlet gas stream showed a clear dependence on the pH of the trickling liquid, decreasing the removal at pH < 5.5. Thus, a proper control of alkalinity, with regular NaHCO(3) addition, was required for successful operation. The laboratory findings were fruitfully transferred to the industry, and the removal of acetone by full-scale BTF was improved"
Keywords:Acetone/*isolation & purification *Air Filters Air Pollutants/isolation & purification Bioreactors Equipment Design *Filtration/instrumentation/methods Laboratories Technology Transfer *Vehicle Emissions/prevention & control Volatile Organic Compounds/iso;
Notes:"MedlineSan-Valero, Pau Gabaldon, Carmen Alvarez-Hornos, Francisco Javier Izquierdo, Marta Martinez-Soria, Vicente eng Evaluation Study England 2018/09/08 J Environ Sci Health A Tox Hazard Subst Environ Eng. 2019; 54(1):1-8. doi: 10.1080/10934529.2018.1496552. Epub 2018 Sep 7"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 18-11-2024