Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract"Effect of Adding Bifidobacterium animalis BZ25 on the Flavor, Functional Components and Biogenic Amines of Natto by Bacillus subtilis GUTU09"    Next AbstractEvaluation of a New DC-Ion Funnel Drift Tube for Use in Proton Transfer Reaction Mass Spectrometry »

J Hazard Mater


Title:Effects of a barium-based additive on gaseous and particulate emissions of a diesel engine
Author(s):Zhang Q; Liu S; Wang Z; Li R; Zhang L; Dong Z;
Address:"School of Automobile and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China. School of Automobile and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China; Tsinghua University Suzhou Automotive Research Institute, Suzhou 215200, China. Electronic address: lstcls@ujs.edu.cn. Jiangsu Zhenjiang Environmental Monitoring Center Station, Zhenjiang 212004, China"
Journal Title:J Hazard Mater
Year:2022
Volume:20211221
Issue:
Page Number:128124 -
DOI: 10.1016/j.jhazmat.2021.128124
ISSN/ISBN:1873-3336 (Electronic) 0304-3894 (Linking)
Abstract:"The addition of barium-based additives is one of the main methods used to suppress smoke emissions in non-road diesel engines. Herein, a commercial barium-based additive was added to diesel fuel at the manufacturer's recommended concentration and used in a non-road four-cylinder supercharged diesel engine, without an after-treatment system, in bench experiments. Regulated emissions of the diesel engine were measured, volatile organic compounds (VOCs) and particulate matter (PM) were sampled. The carbonaceous fraction, water-soluble ions and inorganic elements in the PM were analyzed. Results indicated that the additive effectively reduced carbon monoxide (CO), hydrocarbon (HC) and smoke emissions from the engine. A 71% reduction in smoke was observed at the rated working condition, which was the maximum reduction of the three tested conditions. The additive produced a 36% reduction of VOCs at the rated working condition. The proportion of high carbon number hydrocarbons in the VOCs increased while the atmospheric reactivity of the VOCs decreased. The additive suppressed the concentration of organic carbon (OC) and elemental carbon (EC) emissions with a maximum reduction (40%) of total carbon achieved under the rated working condition. After the application of the additive, the concentration of water-soluble ions (Cl(-), SO(4)(2-), NO(3)(-), Na(+), K(+), Ca(2+), NH(4)(+)) and elements (Fe, Mn, S, Ca, Ba) in the PM increased. A trend of increasing Barium content in the PM matched a similar trend of decreasing smoke"
Keywords:*Air Pollutants/analysis Barium Gases Gasoline/analysis Particulate Matter/analysis *Vehicle Emissions/analysis Barium-based fuel additive Chemical fraction Diesel engine Particulate matter Volatile organic compounds;
Notes:"MedlineZhang, Qixia Liu, Shuai Wang, Zhong Li, Ruina Zhang, Libin Dong, Zheng eng Research Support, Non-U.S. Gov't Netherlands 2022/01/02 J Hazard Mater. 2022 Apr 5; 427:128124. doi: 10.1016/j.jhazmat.2021.128124. Epub 2021 Dec 21"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 26-12-2024