Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractCharacterization and metabolism pathway of volatile compounds in walnut oil obtained from various ripening stages via HS-GC-IMS and HS-SPME-GC-MS    Next AbstractEffect of continuous ozone injection on performance and biomass accumulation of biofilters treating gaseous toluene »

Appl Microbiol Biotechnol


Title:Effect of continuous ozone injection on performance and biomass accumulation of biofilters treating gaseous toluene
Author(s):Xi J; Saingam P; Gu F; Hu HY; Zhao X;
Address:"Environmental Simulation and Pollution Control State Key Joint Laboratory, State Environmental Protection Key Laboratory of Microorganism Application and Risk Control (SMARC), School of Environment, Tsinghua University, 100084, Beijing, People's Republic of China, xijinying@tsinghua.edu.cn"
Journal Title:Appl Microbiol Biotechnol
Year:2014
Volume:20140709
Issue:22
Page Number:9437 - 9446
DOI: 10.1007/s00253-014-5888-z
ISSN/ISBN:1432-0614 (Electronic) 0175-7598 (Linking)
Abstract:"Biofilters treating high-concentration gaseous volatile organic compounds (VOC) can be subject to bed clogging induced by excess biomass accumulation. In this study, O3 was continuously injected into biofilters to control biomass. Its effects on the performance of the biofilters and on biomass accumulation were investigated. Four identical biofilters designed to treat gaseous toluene were operated for 70 days, and three of them were continuously injected with O3 at different concentrations (from 80 to 320 mg/m(3)). The results showed that continuous O3 injection could effectively keep the bed pressure drop stable and had no adverse effect on toluene removal when O3 concentrations were 180-220 mg/m(3). The maximum toluene elimination capacity of the four biofilters was 140 g-toluene/m(3)/h, and the bed pressure drop of the biofilter fed with 180-220 mg/m(3) O3 remained below 3 mmH2O/m throughout the operation period. The biomass accumulation rates of the three biofilters with O3 at 80-320 mg/m(3) were lowered by 0.15-0.25 g/L/day compared with the biofilter without O3. The decreases in biomass accumulation resulted in higher void fractions of the filter beds with O3 injection. Carbon balance analysis indicated that CO2 production had increased while biomass accumulation and leachate waste production decreased in response to O3 injection. Based on the experimental results, it was concluded here that continuous O3 injection can reduce increases in bed pressure effectively, preserve VOC removal capacity, and prevent production of extra leachate waste"
Keywords:*Biomass Carbon Dioxide/metabolism Filtration/*methods Hydrostatic Pressure Ozone/*metabolism Toluene/*metabolism;
Notes:"MedlineXi, Jinying Saingam, Prakit Gu, Feng Hu, Hong-Ying Zhao, Xuefei eng Research Support, Non-U.S. Gov't Germany 2014/07/10 Appl Microbiol Biotechnol. 2014 Nov; 98(22):9437-46. doi: 10.1007/s00253-014-5888-z. Epub 2014 Jul 9"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 16-11-2024