Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractDevelopment and initial testing of a novel slime mould biosensor    Next AbstractFlat lizard female mimics use sexual deception in visual but not chemical signals »

J Sep Sci


Title:Evaluation of split/splitless operation and rapid heating of a multi-bed sorption trap used for gas chromatography analysis of large-volume air samples
Author(s):Whiting JJ; Sacks RD;
Address:"Department of Chemistry, University of Michigan, Ann Arbor, MI 48109, USA"
Journal Title:J Sep Sci
Year:2006
Volume:29
Issue:2
Page Number:218 - 227
DOI: 10.1002/jssc.200500276
ISSN/ISBN:1615-9306 (Print) 1615-9306 (Linking)
Abstract:"The effects of split-flow operation and rapid trap heating on injection-plug widths from an electrically heated, microscale, multibed sorption trap were evaluated. The sorption trap has been designed to quantitatively collect volatile organic compounds from large-volume vapor samples and inject them into a gas chromatograph. Previous trap designs resulted in injection-plug widths of typically a second or more, and this significantly degraded chromatographic resolution, particularly for early-eluting sample components and for high-speed separations. Injection-plug widths are determined by the heating rate of the trap during sample desorption and the volumetric flow rate of carrier gas through the trap. The effects of the heating rate of the trap and carrier gas velocity through the trap on the injection-plug widths of pentane, octane, and undecane were studied. Carrier gas velocity through the trap was increased by splitting the flow coming from the trap between the column and a vent. This decreases transport time from the trap to the column, and thus decreases injection-plug widths. The heating rate for the trap was increased by increasing the applied voltage in the range from 4 to 30 V. Increasing the heating rate decreases the time required to desorb the analytes from the sorbent bed, thus decreasing injection-plug width. Injection-plug widths as small as 89, 210, and 520 ms were obtained in the split mode with very fast heating rates for n-pentane, noctane, and n-undecane, respectively. The effect of split ratio on resolving power, peak height, and peak width was also evaluated"
Keywords:"Air/*analysis Chromatography, Gas/instrumentation/*methods Flame Ionization/instrumentation/methods Hot Temperature Organic Chemicals/analysis Volatilization;"
Notes:"MedlineWhiting, Joshua J Sacks, Richard D eng R01-OH03692/OH/NIOSH CDC HHS/ Research Support, U.S. Gov't, Non-P.H.S. Research Support, U.S. Gov't, P.H.S. Germany 2006/03/10 J Sep Sci. 2006 Feb; 29(2):218-27. doi: 10.1002/jssc.200500276"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 16-11-2024