| Title: | Durability and Corrosion Properties of Waterborne Coating Systems on Mild Steel Dried under Atmospheric Conditions and by Infrared Radiation |
| Author(s): | Stojanovic I; Cindric I; Turkalj L; Kurtela M; Rakela-Ristevski D; |
| Address: | "Chair of Materials Protection, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 10002 Zagreb, Croatia. Koncar Steel Structures Inc., 10000 Zagreb, Croatia" |
| ISSN/ISBN: | 1996-1944 (Print) 1996-1944 (Electronic) 1996-1944 (Linking) |
| Abstract: | "Increasing attention is given to waterborne coatings for corrosion protection due to the lower ecological impact on the environment. It has been found that by using waterborne coatings, the emission of harmful volatile organic compounds (VOCs) is reduced by more than 50 g/L. However, they require longer drying time, their anti-corrosion performance is not as good as solvent-borne coatings and they still have not been developed for all corrosion environments. Another way to reduce VOCs is by using infrared (IR) drying technology. With catalytic infrared radiation, it is possible to cure all surfaces at notably reduced costs compared to traditional systems and in total respect for the environment, thanks to significant energy savings and minimal CO(2) emissions. The aim of this paper was to evaluate corrosion protective properties of waterborne coatings which were dried with traditional and accelerated drying techniques, i.e., under atmospheric conditions and by using IR technology. Two different coating systems were applied, with and without Zn in the primer. To achieve this goal, the test samples were subjected to electrochemical, corrosion, and physical tests. It was shown that infrared technology does not affect the quality of the coating and it drastically reduces the intercoating interval. A coating system with zinc in the primer showed better overall protection properties after being subjected to impedance and salt spray testing, but generally, solvent-borne coatings still have higher durability than waterborne in extreme marine conditions according to recent research. Microstructure and porosity remained intact and the atomic force microscope confirmed that the flash-off was conducted correctly since there were no pinholes and blisters detected on the coating's surface. This study can serve as a foundation for further investigations of IC-dried waterborne coatings because there are not many at the moment" |
| Keywords: | corrosion infrared (IR) drying volatile organic compounds (VOCs) waterborne coatings; |
| Notes: | "PubMed-not-MEDLINEStojanovic, Ivan Cindric, Ivan Turkalj, Lovro Kurtela, Marin Rakela-Ristevski, Daniela eng KK.01.2.1.02.0030./European Regional Development Fund/ Switzerland 2022/11/27 Materials (Basel). 2022 Nov 12; 15(22):8001. doi: 10.3390/ma15228001" |
