Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstracttea1 and the microtubular cytoskeleton are important for generating global spatial order within the fission yeast cell    Next AbstractSelective preconcentration of volatile mercaptans in small SPE cartridges: quantitative determination of trace odor-active polyfunctional mercaptans in wine »

Nanomaterials (Basel)


Title:"Oxidation of Methanol and Dichloromethane on TiO(2)-CeO(2)-CuO, TiO(2)-CeO(2) and TiO(2)-CuO@VUKOPOR((R))A Ceramic Foams"
Author(s):Matejova L; Troppova I; Pitkaaho S; Pacultova K; Fridrichova D; Kania O; Keiski R;
Address:"Institute of Environmental Technology, CEET, VSB-Technical University of Ostrava, 17. Listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic. Environmental and Chemical Engineering, Faculty of Technology, University of Oulu, P.O. Box 4300, FI-90014 Oulu, Finland. Elvac Ekotechnika s.r.o, Tavicska 337/23, 703 00 Ostrava-Vitkovice, Czech Republic"
Journal Title:Nanomaterials (Basel)
Year:2023
Volume:20230323
Issue:7
Page Number: -
DOI: 10.3390/nano13071148
ISSN/ISBN:2079-4991 (Print) 2079-4991 (Electronic) 2079-4991 (Linking)
Abstract:"The application-attractive form of TiO(2), CeO(2) and CuO-based open-cell foam supported catalysts was designed to investigate their catalytic performance in oxidation of two model volatile organic compounds-methanol and dichloromethane. TiO(2)-CeO(2), TiO(2)-CuO and TiO(2)-CeO(2)-CuO catalysts as thin films were deposited on VUKOPOR((R))A ceramic foam using a reverse micelles-controlled sol-gel method, dip-coating and calcination. Three prepared catalytic foams were investigated via light-off tests in methanol and dichloromethane oxidation in the temperature range of 45-400 degrees C and 100-500 degrees C, respectively, at GHSV of 11, 600 h(-1), which fits to semi-pilot/industrial conditions. TiO(2)-CuO@VUKOPOR((R))A foam showed the best catalytic activity and CO(2) yield in methanol oxidation due to its low weak Lewis acidity, high weak basicity and easily reducible CuO species and proved good catalytic stability within 20 h test. TiO(2)-CeO(2)-CuO@VUKOPOR((R))A foam was the best in dichloromethane oxidation. Despite of its lower catalytic activity compared to TiO(2)-CeO(2)@VUKOPOR((R))A foam, its highly-reducible -O-Cu-Ce-O- active surface sites led to the highest CO(2) yield and the highest weak Lewis acidity contributed to the highest HCl yield. This foam also showed the lowest amount of chlorine deposits"
Keywords:VUKOPOR(R)A ceramic foam catalytic oxidation ceria copper oxide dichloromethane methanol mixed oxide catalyst titania volatile organic compounds;
Notes:"PubMed-not-MEDLINEMatejova, Lenka Troppova, Ivana Pitkaaho, Satu Pacultova, Katerina Fridrichova, Dagmar Kania, Ondrej Keiski, Riitta eng LM2018098/Ministry of Education, Youth and Sports of the Czech Republic/ CZ.02.1.01./0.0/0.0/17_049/0008419/ERDF/ Switzerland 2023/04/14 Nanomaterials (Basel). 2023 Mar 23; 13(7):1148. doi: 10.3390/nano13071148"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024