Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractEnrichment of mayonnaise with a high fat fish oil-in-water emulsion stabilized with modified DATEM C14 enhances oxidative stability    Next AbstractAdaptor complex-independent clathrin function in yeast »

Environ Sci Technol


Title:Construction of a low-pressure microwave plasma reactor and its application in the treatment of volatile organic compounds
Author(s):Yet-Pole I; Liu YC; Han KY; She TC;
Address:"Department of Safety, Health, and Environmental Engineering, National Yunlin University of Science and Technology, Touliu, Taiwan. iyp@pine.yuntech.edu.tw"
Journal Title:Environ Sci Technol
Year:2004
Volume:38
Issue:13
Page Number:3785 - 3791
DOI: 10.1021/es034697a
ISSN/ISBN:0013-936X (Print) 0013-936X (Linking)
Abstract:"Volatile organic compounds (VOCs) containing gases exhausted from industrial processes are highly toxic to human health; therefore, their safe elimination is extremely important. This paper describes how a novel prototype microwave plasma reactor was sequentially improved. The design concepts for each modification are also carefully described. For testing the reactor's performance, ethanol was selected as the target VOC. The decomposing and removal efficiency (DRE) value was used to evaluate the reactor's performance. The final stage of the revamping reactor was evaluated to meet the requirements of both stability and long term, high volume operation. When studying the VOC treatment operations, oxygen, air, and water vapor were used as carrier gases or additives to improve the efficiency of the DRE value and to facilitate the ethanol treatment. A DRE value higher than 99% was obtained under these optimal conditions: an ethanol vapor flow rate of 1730 cm3/min (67 mbar, 150 degrees C), power input higher than 1.5 kW, a frequency of 200 Hz, an air flow rate of 100 cm3/min (4 atm, 25 degrees C), and a liquid water addition rate higher than 0.21 mL/min (1 atm, 25 degrees C). With these conditions, the initial concentration of ethanol vapor mixed with the carrier gas was about 7-10%. Because of high processing efficiency and capacity of this system, it could be a potential alternative tool for treating industrial VOCs"
Keywords:"*Air Pollutants Air Pollution/*prevention & control Chemistry, Organic/*instrumentation/methods Equipment Design Ethanol/chemistry *Microwaves Organic Chemicals/*chemistry Oxygen/chemistry Pressure Volatilization;"
Notes:"MedlineYet-Pole, I Liu, Yung-Chuan Han, Kun-Yo She, Tien-Chai eng Research Support, Non-U.S. Gov't 2004/08/07 Environ Sci Technol. 2004 Jul 1; 38(13):3785-91. doi: 10.1021/es034697a"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 26-12-2024