Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractThe consequences of genetic variation in sex peptide expression levels for egg laying and retention in females    Next AbstractDevelopment and demonstration of an explicit lumped-parameter biofilter model and design equation incorporating monod kinetics »

J Air Waste Manag Assoc


Title:"Evaluation of trickle bed air biofilter performance as a function of inlet VOC concentration and loading, and biomass control"
Author(s):Smith FL; Sorial GA; Suidan MT; Pandit A; Biswas P; Brenner RC;
Address:"Department of Civil and Environmental Engineering, University of Cincinnati, Ohio, USA"
Journal Title:J Air Waste Manag Assoc
Year:1998
Volume:48
Issue:7
Page Number:627 - 636
DOI: 10.1080/10473289.1998.10463712
ISSN/ISBN:1096-2247 (Print) 1096-2247 (Linking)
Abstract:"The 1990 Amendments to the Clear Air Act have stimulated strong interest in the use of biofiltration for the economical, engineered control of volatile organic compounds (VOCs) in effluent air streams. Trickle bed air biofilters (TBABs) are especially applicable for treating VOCs at high loadings. For long-term stable operation of highly loaded TBABs, removal of excess accumulated biomass is essential. Our previous research demonstrated that suitable biomass control for TBABs was achievable by periodic backwashing of the biofilter medium. Backwashing was performed by fluidizing the pelletized biological attachment medium with warm water to about a 40% bed expansion. This paper presents an evaluation of the impact of backwashing on the performance of four such TBABs highly loaded with toluene. The inlet VOC concentrations studied were 250 and 500 ppmv toluene, and the loadings were 4.1 and 6.2 kg COD/m3 day (55 and 83 g toluene/m3 hr). Loading is defined as kg of chemical oxygen demand per cubic meter of medium per day. Performance deterioration at the higher loading was apparently due to a reduction of the specific surface of the attached biofilm resulting from the accumulation of excess biomass. For a toluene loading of 4.1 kg COD/m3 day, it was demonstrated that the long-term performance of biofilters with either inlet concentration could be maintained at over 99.9% VOC removal by employing a backwashing strategy consisting of a frequency of every other day and a duration of 1 hr"
Keywords:Air Pollution/*prevention & control *Biomass Filtration Hydrocarbons/*analysis;
Notes:"MedlineSmith, F L Sorial, G A Suidan, M T Pandit, A Biswas, P Brenner, R C eng Research Support, U.S. Gov't, Non-P.H.S. 1998/08/26 J Air Waste Manag Assoc. 1998 Jul; 48(7):627-36. doi: 10.1080/10473289.1998.10463712"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 15-11-2024