Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractComparison between tinzaparin and standard heparin for chronic hemodialysis in a Canadian center    Next AbstractChanges in volatile organic compounds provoked by lipopolysaccharide- or alpha toxin-induced inflammation in ventilated rats »

Environ Sci Technol


Title:Modeling effective diffusivity of volatile organic compounds in activated carbon fiber
Author(s):Lordgooei M; Rood MJ; Rostam-Abadi M;
Address:"School of Environmental Science, Engineering & Policy, Drexel University, Philadelphia, Pennsylvania 19104, USA. lordgooei@drexel.edu"
Journal Title:Environ Sci Technol
Year:2001
Volume:35
Issue:3
Page Number:613 - 619
DOI: 10.1021/es0012568
ISSN/ISBN:0013-936X (Print) 0013-936X (Linking)
Abstract:"Volatile organic compounds (VOCs) comprise 67% of total hazardous air pollutants (HAPs) that are emitted by major industrial point sources into the U.S. atmosphere (1). Adsorption by activated carbon fiber (ACF) has been recognized as one of the feasible regenerative control processes to separate and recover VOCs for reuse. Characteristics of VOCs transport in ACFs are required to efficiently design ACF sorption systems. However, extensive resources are spent experimentally obtaining transient sorption data to design adsorption systems. As an alternative, this work develops a new model that predicts effective diffusivities of VOCs into ACFs. The diffusion process is modeled as Knudsen transport into the ACF open pore spaces coupled with activated surface diffusion on the ACF's internal surface area. Temperature and Darken's factors are included in the surface diffusion model to provide corrections for thermodynamic state and deviation from Fick's Law, respectively. Depth of the adsorption potential well is considered as the product of the heat of adsorption of a reference VOC, an adsorption similarity factor, and a surface diffusion energy factor. Introduction of the adsorption similarity factor in the effective diffusivity model is a new concept providing a means to predict effective diffusivity of similar adsorption systems from a reference system. Experimental data from a short length column are used to determine effective diffusivity of acetone in ACF. Results from this diffusivity model are compared to experimental values for the acetone/ACF system to describe the degree of closure between modeled and experimental results"
Keywords:"Adsorption Air Pollutants/*analysis *Charcoal Diffusion Kinetics *Models, Theoretical Organic Chemicals Volatilization;"
Notes:"MedlineLordgooei, M Rood, M J Rostam-Abadi, M eng 2001/05/16 Environ Sci Technol. 2001 Feb 1; 35(3):613-9. doi: 10.1021/es0012568"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024