Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract"Actual commuter exposure to methyl-tertiary butyl ether, benzene and toluene while traveling in Korean urban areas"    Next AbstractThe effect of humidity on the ozonolysis of unsaturated compounds in aerosol particles »

Water Res


Title:Adsorption of dichloromethane from water onto a hydrophobic polymer resin XAD-1600
Author(s):Lee JW; Jung HJ; Kwak DH; Chung PG;
Address:"Faculty of Environmental and Chemical Engineering, Seonam University, Namwon 590-170, Republic of Korea. jwlee@seonam.ac.kr"
Journal Title:Water Res
Year:2005
Volume:20041223
Issue:4
Page Number:617 - 629
DOI: 10.1016/j.watres.2004.10.001
ISSN/ISBN:0043-1354 (Print) 0043-1354 (Linking)
Abstract:"Dichloromethane is one of the chlorinated volatile organic compounds (CVOCs) that contaminate the waters. Especially, the dichloromethane used as a solvent in polycarbonate synthesis, is dissolved in wastewater with the saturated solubility of 17,220 mg L(-1), which is several times that of other CVOCs. Thus, it is reasonable to recover the dichloromethane dissolved in water instead of destruction based on the economic point of view. To study on the recovery of the dichloromethane, adsorption equilibrium and column dynamics were investigated using a hydrophobic polymer resin (XAD-1600) without the ion-exchange functional groups. In addition, a hydrophilic polymer resin (XAD-7) and an activated carbon (DY-GAC) were chosen for comparison. Conventional two- or three-parameter models such as the Langmuir, Freundlich, or Sis equations could not fit the adsorption equilibrium data of two polymer resins obtained over the entire range of concentration (1-200 mol m(-3)). They were well fitted by a hybrid model consisting of Langmuir and BET (Brunauer-Emmett-Teller) equations. The adsorption amount at high concentration was in the order of XAD-1600>XAD-7>DY-GAC on a mass basis. To confirm the possibility of using resin as a sorbent for the removal of dichloromethane, adsorption breakthrough curves were measured under key operating conditions such as the concentration, the flow rate, and the column length. Moreover, desorption from polymer resins adsorbed with dichloromethane was conducted by using pure water only as a desorbate. A simple dynamic model was also formulated to describe the adsorption breakthrough curves of dichloromethane from XAD-1600, XAD-7 and DY-GAC columns"
Keywords:"Acrylic Resins/*chemistry Adsorption Hydrophobic and Hydrophilic Interactions Methylene Chloride/*isolation & purification Polymers/chemistry Polystyrenes/*chemistry Solubility Time Factors Water Pollutants, Chemical/*isolation & purification Water Purifi;"
Notes:"MedlineLee, Jae-Wook Jung, Heung-Joe Kwak, Dong-Heui Chung, Paul-Gene eng Comparative Study Research Support, Non-U.S. Gov't England 2005/02/15 Water Res. 2005 Feb; 39(4):617-29. doi: 10.1016/j.watres.2004.10.001. Epub 2004 Dec 23"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024