Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractComparative analysis of volatile organic compounds of breath and urine for distinguishing patients with liver cirrhosis from healthy controls by using electronic nose and voltammetric electronic tongue    Next AbstractApplication of high silica zeolite ZSM-5 in a hybrid treatment process based on sequential adsorption and ozonation for VOCs elimination »

J Hazard Mater


Title:Evaluation of the potential of volatile organic compound (di-methyl benzene) removal using adsorption on natural minerals compared to commercial oxides
Author(s):Zaitan H; Korrir A; Chafik T; Bianchi D;
Address:"Laboratory LCMC, Faculty of Sciences and Techniques, University Sidi Mohamed BenAbdellah, B.P. 2202, Fez, Morocco. Electronic address: hicham.zaitan@usmba.ac.ma"
Journal Title:J Hazard Mater
Year:2013
Volume:20130901
Issue:
Page Number:365 - 376
DOI: 10.1016/j.jhazmat.2013.08.071
ISSN/ISBN:1873-3336 (Electronic) 0304-3894 (Linking)
Abstract:"This study is dedicated to the investigation of the potential of volatile organic compounds (VOC) adsorption over low cost natural minerals (bentonite and diatomite). The performances of these solids, in terms of adsorption/desorption properties, were compared to commercial adsorbents, such as silica, alumina and titanium dioxide. The solids were first characterized by different physico-chemical methods and di-methyl benzene (dMB) was selected as model VOC pollutant for the investigation of adsorptive characteristics. The experiments were carried out with a fixed bed reactor under dynamic conditions using Fourier Transform InfraRed spectrometer to measure the evolution of dMB concentrations in the gaseous stream at the outlet of the reactor. The measured breakthrough curves yields to adsorbed amounts at saturation that has been used to obtain adsorption isotherms. The latters were used for determination of the heat involved in the adsorption process and estimation of its values using the isosteric method. Furthermore, the performances of the studied materials were compared considering the adsorption efficiency/cost ratio"
Keywords:"Adsorption Microscopy, Electron, Scanning Minerals/*chemistry Oxides/*chemistry Thermogravimetry Xylenes/chemistry/*isolation & purification Clay Heat of adsorption Isotherm of adsorption Voc;"
Notes:"MedlineZaitan, Hicham Korrir, Abdelhamid Chafik, Tarik Bianchi, Daniel eng Comparative Study Netherlands 2013/09/26 J Hazard Mater. 2013 Nov 15; 262:365-76. doi: 10.1016/j.jhazmat.2013.08.071. Epub 2013 Sep 1"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 26-12-2024