| Title: | Composite Encapsulation Enabled Superior Comprehensive Stability of Perovskite Solar Cells |
| Author(s): | Lv Y; Zhang H; Liu R; Sun Y; Huang W; |
| Address: | "Key Laboratory of Flexible Electronics (KLOFE) and Institute of Advanced Materials (IAM), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (NanjingTech), 30 South Puzhu Road, Nanjing 211816, P. R. China" |
| Journal Title: | ACS Appl Mater Interfaces |
| ISSN/ISBN: | 1944-8252 (Electronic) 1944-8244 (Linking) |
| Abstract: | "Solar cells based on organometal hybrid perovskites have exhibited promising commercialization potential owing to their high efficiency and low-cost manufacturing. However, the poor outdoor operational stability of perovskite solar cells restricted their practical application, and moisture permeation and organic compounds volatilization are realized as the main factors accelerating performance degradation. Herein, we developed a composite encapsulation, by sequentially depositing a compact Al(2)O(3) layer and a hydrophobic 1H,1H,2H,2H-perfluorodecyltrichlorosilane layer on the completed device, to efficiently circumvent vapor permeability. Thus, the stability of the encapsulated perovskite solar cells was systematically investigated under simulated operational conditions. It was found that the MAPbI(3) perovskite was prone to decay into solid PbI(2) and organic vapor at high temperature or upon light illumination, and the decomposition was reversible in a well-encapsulated environment, resulting in reversible performance degradation and recovery. The enhanced thermal stability was ascribed to the competition between the perovskite decomposition and reverse synthesis. The as-prepared high-quality, multilayered encapsulation scheme demonstrated superior sealing property, and no obvious performance decline was observed when the device was stored under ambient air, continuous light illumination, double 85 condition (85 degrees C, 85% humidity), or even water immersion. Therefore, this work paves the way for a scalable and robust encapsulation strategy feasible to hybrid perovskite optoelectronics in a reproducible manner" |
| Keywords: | atomic layer deposition encapsulation perovskite decomposition perovskite solar cells stability; |
| Notes: | "PubMed-not-MEDLINELv, Yifan Zhang, Hui Liu, Ruqing Sun, Yanan Huang, Wei eng 2020/05/23 ACS Appl Mater Interfaces. 2020 Jun 17; 12(24):27277-27285. doi: 10.1021/acsami.0c06823. Epub 2020 Jun 3" |
