| Title: | "Adsorption-desorption characteristics of methyl ethyl ketone with modified activated carbon and inhibition of 2,3-butanediol production" |
| Author(s): | Nien KC; Chang FT; Chang MB; |
| Address: | "a Graduate Institute of Environmental Engineering, National Central University , Taiwan , Republic of China. b JG Environmental Technology Co., Ltd , Taoyuan County , Taiwan , Republic of China" |
| DOI: | 10.1080/10962247.2015.1084399 |
| ISSN/ISBN: | 1096-2247 (Print) 1096-2247 (Linking) |
| Abstract: | "Activated carbon (AC) is seldom applied for recovering ketone-based volatile organic compounds because of safety concerns. Adsorption of methyl ethyl ketone (MEK) with AC is a highly exothermic reaction that potentially causes fires in AC beds. Moreover, 2,3-butanediol (BDO) is produced in the desorbed solvent, causing yellowing and odor of the recovered solvent. This study applied a continuous adsorption-desorption apparatus for evaluating the operating capacities and BDO concentration in recovered MEK containing modified and original ACs. AC-1 (TAKETA- G2X) was used as the target for modification. The experimental results indicate that using MgO as the modifier increases the ignition point by 12 degrees C and that applying KNO3 as the modifier reduces the AC ignition point by 28 degrees C (compared with AC-1). The BDO concentration of the desorbed MEK solvent can be reduced by increasing the loading of the modifying agent (Ethanolamine) (Im-1: 3.1 wt%; Im-5: 6.2 wt%). Moreover, applying the AC pretreated with nitrogen (Im-6) as adsorbent significantly reduces the BDO concentration (from 0.123 wt% to 0.073 wt%). Because desorption and purging procedures were performed in N2 atmospheres, the BDO concentrations of the desorbed MEK solvents were relatively low and ranged from 0.032 wt% to 0.043 wt%. When the MEK concentration was reduced to 2000 ppm, lower BDO concentrations (0.012-0.022 wt%) were measured in the recovered MEK solvent. The way to modify activated carbon and a better desorbing sequence to effectively inhibit the oxidation of MEK to BDO are developed. The results obtained indicate that the BDO concentration in the desorbed solvent was lower than the original MEK solvent (0.023 wt%). Different approaches can be applied simultaneously to achieve high inhibition effects; however, carbon adsorption performance may be negatively affected. IMPLICATIONS: The study is motivated to improve the quality of recovered solvent and reduce fire hazards, particularly when AC is applied for adsorbing a ketone-based solvent (e.g., MEK). The experimental results indicate that the BDO concentration in the recovered solvent can be reduced and the ignition point of AC can be increased by modifying the AC with an appropriate agent" |
| Keywords: | "Adsorption Butanones/*chemistry Butylene Glycols/*analysis Charcoal/*chemistry Solvents/*chemistry Waste Disposal, Fluid/*methods;" |
| Notes: | "MedlineNien, Kai Chun Chang, Feng Tang Chang, Moo Been eng Research Support, Non-U.S. Gov't 2015/10/21 J Air Waste Manag Assoc. 2015 Nov; 65(11):1317-26. doi: 10.1080/10962247.2015.1084399" |
