Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractEffect of combined treatment with supercritical CO(2) and rosemary on microbiological and physicochemical properties of ground pork stored at 4 degrees C    Next AbstractDensity-induced social stress alters oxytocin and vasopressin activities in the brain of a small rodent species »

Chemosphere


Title:A conceptual study on the formulation of a permeable reactive pavement with activated carbon additives for controlling the fate of non-point source environmental organic contaminants
Author(s):Huang S; Liang C;
Address:"Department of Environmental Engineering, National Chung Hsing University, 250 Kuo-kuang Road, Taichung 402, Taiwan. Department of Environmental Engineering, National Chung Hsing University, 250 Kuo-kuang Road, Taichung 402, Taiwan. Electronic address: cliang@nchu.edu.tw"
Journal Title:Chemosphere
Year:2018
Volume:20171107
Issue:
Page Number:438 - 446
DOI: 10.1016/j.chemosphere.2017.11.028
ISSN/ISBN:1879-1298 (Electronic) 0045-6535 (Linking)
Abstract:"To take advantage of the road pavement network where non-point source (NPS) pollution such as benzene, toluene, ethyl-benzene, and xylene (BTEX) from vehicle traffic exhaust via wet and dry atmospheric deposition occurs, the asphalt pavement may be used as a media to control the NPS pollution. An experiment to prepare an adsorptive porous reactive pavement (PRP) was initiated to explore the potential to reduce environmental NPS vehicle pollution. The PRP was prepared and studied as follows: various activated carbons (AC) were initially screened to determine if they were suitable as an additive in the porous asphalt mixture; various mixtures of a selected AC were incorporated with the design of porous asphalt concrete (PAC) to produce PRP, and the PRP formulations were tested to ensure that they comply with the required specifications; qualified specimens were subsequently tested to determine their adsorption capacity for BTEX in aqueous solution, as compared to conventional PAC. The PRP08 and PRP16 samples, named for the design formulations of 0.8% and 1.6% of AC (by wt. in the formulation), exhibited low asphalt drain-down and low abrasion loss and also met all regulated specifications. The BTEX adsorption capacity measurements of PRP08 and PRP16 were 33-46%, 36-51%, 20-22%, and 6-8% respectively, higher than those obtained from PACs. Based on the test results, PRPs showed good physical performance and adsorption and may be considered as a potential method for controlling the transport of NPS vehicle pollutants"
Keywords:Adsorption Benzene Benzene Derivatives Charcoal/*chemistry Environmental Pollution/analysis/*prevention & control Hydrocarbons/*chemistry Porosity Toluene *Vehicle Emissions Xylenes Activated carbons (AC) Non-point source pollution (NPS) Permeable reactiv;
Notes:"MedlineHuang, Shengyi Liang, Chenju eng England 2017/11/21 Chemosphere. 2018 Feb; 193:438-446. doi: 10.1016/j.chemosphere.2017.11.028. Epub 2017 Nov 7"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 26-12-2024