Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractToxic effects of individual and combined effects of BTEX on Euglena gracilis    Next AbstractVolatile organic compound exposure of suburban elementary students in Taiwan »

J Environ Monit


Title:Performance evaluation of a sorbent tube sampling method using short path thermal desorption for volatile organic compounds
Author(s):Peng CY; Batterman S;
Address:"Environmental Health Sciences, University of Michigan, Ann Arbor 48109-2029, USA"
Journal Title:J Environ Monit
Year:2000
Volume:2
Issue:4
Page Number:313 - 324
DOI: 10.1039/b003385p
ISSN/ISBN:1464-0325 (Print) 1464-0325 (Linking)
Abstract:"Air sampling, using sorbents, thermal desorption and gas chromatography, is a versatile method for identifying and quantifying trace levels of volatile organic compounds (VOCs). Thermal desorption can provide high sensitivity, appropropriate choices of sorbents and method parameters can accommodate a wide range of compounds and high humidity, and automated short-path systems can minimize artifacts, losses and carry-over effects. This study evaluates the performance of a short-path thermal desorption method for 77 VOCs using laboratory and field tests and a dual sorbent system (Tenax GR, Carbosieve SIII). Laboratory tests showed that the method requirements for ambient air sampling were easily achieved for most compounds, e.g., using the average and standard deviation across target compounds, blank emissions were < or = 0.3 ng per sorbent tube for all target compounds except benzene, toluene and phenol; the method detection limit was 0.05 +/- 0.08 ppb, reproducibility was 12 +/- 6%, linearity, as the relative standard deviation of relative response factors, was 16 +/- 9%, desorption efficiency was 99 +/- 28%, samples stored for 1-6 weeks had recoveries of 87 +/- 9%, and high humidity samples had recoveries of 102 +/- 12%. Due to sorbent, column and detector characteristics, performance was somewhat poorer for phenol groups, ketones, and nitrogen containing compounds. The laboratory results were confirmed in an analysis of replicate samples collected in two field studies that sampled ambient air along roadways and indoor air in a large office building. Replicates collected under field conditions demonstrated good agreement except for very low concentrations or large (> 41 volume) samples of high humidity air. Overall, the method provides excellent performance and satisfactory throughput for many applications"
Keywords:Adsorption Air Pollutants/*analysis Environmental Monitoring/*instrumentation/methods Humidity Organic Chemicals/analysis Sensitivity and Specificity Temperature Volatilization;
Notes:"MedlinePeng, C Y Batterman, S eng Research Support, U.S. Gov't, Non-P.H.S. England 2001/03/16 J Environ Monit. 2000 Aug; 2(4):313-24. doi: 10.1039/b003385p"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 17-11-2024