Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract[Allelopathic effects of companion weed Descurainia sophia on wheat]    Next AbstractModeling variations of medium porosity in rotating drum biofilter »

Water Res


Title:Effect of gas empty bed contact time on performances of various types of rotating drum biofilters for removal of VOCs
Author(s):Yang C; Suidan MT; Zhu X; Kim BJ; Zeng G;
Address:"College of Environmental Science and Engineering, Hunan University, Changsha, Hunan 410082, China. yangc@hnu.cn"
Journal Title:Water Res
Year:2008
Volume:20080621
Issue:14
Page Number:3641 - 3650
DOI: 10.1016/j.watres.2008.05.012
ISSN/ISBN:0043-1354 (Print) 0043-1354 (Linking)
Abstract:"The effects of gas empty bed contact time (EBCT), biofilter configuration, and types of volatile organic compounds (VOCs) were evaluated to assess the performance of rotating drum biofilters (RDBs), especially at low EBCT values. Three types of pilot-scale RDBs, a single-layer RDB, a multi-layer RDB, and a hybrid RDB, were examined at various gas EBCTs but at a constant VOC loading rate. Diethyl ether, toluene, and hexane were used separately as model VOC. When EBCT increased from 5.0 to 60s at a constant VOC loading rate of 2.0kgCOD/(m(3)day), ether removal efficiency increased from 73.1% to 97.6%, from 81.6% to 99.9%, and from 84.0% to 99.9% for the single-layer RDB, the multi-layer RDB, and the hybrid RDB, respectively, and toluene removal efficiency increased from 76.4% to 99.9% and from 84.8% to 99.9% for the multi-layer RDB and the hybrid RDB, respectively. When hexane was used as the model VOC at a constant loading rate of 0.25kgCOD/(m(3)day), hexane removal efficiency increased from 31.1% to 57.0% and from 29.5% to 50.0% for the multi-layer RDB and hybrid RDB, respectively. The single-layer, multi-layer, and hybrid RDBs exhibited, respectively, the lowest, middle, and highest removal efficiencies, when operated under similar operational loading conditions. Hexane exhibited the lowest removal efficiency, while diethyl ether displayed the highest removal efficiency. The data collected at the various EBCT values correlated reasonably well with a saturation model. The sensitivity of removal efficiency to EBCT varied significantly with EBCT values, VOC properties, and biofilter configurations. Process selection and design for RDB processes should consider these factors"
Keywords:"*Bioreactors Ether/chemistry Filtration/*instrumentation/*methods Hexanes/chemistry Volatile Organic Compounds/*chemistry Water Pollutants, Chemical/chemistry;"
Notes:"MedlineYang, Chunping Suidan, Makram T Zhu, Xueqing Kim, Byung J Zeng, Guangming eng Research Support, Non-U.S. Gov't Research Support, U.S. Gov't, Non-P.H.S. England 2008/08/08 Water Res. 2008 Aug; 42(14):3641-50. doi: 10.1016/j.watres.2008.05.012. Epub 2008 Jun 21"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 21-11-2024