Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractChemical characterization of emissions from a municipal solid waste treatment plant    Next AbstractInhibition effect of polyurethane foam waste in dioxin formation »

Waste Manag


Title:Characterization of gaseous emissions and ashes from the combustion of furniture waste
Author(s):Moreno AI; Font R; Conesa JA;
Address:"Department of Chemical Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain. Electronic address: anaisabel.moreno@ua.es. Department of Chemical Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain"
Journal Title:Waste Manag
Year:2016
Volume:20161004
Issue:
Page Number:299 - 308
DOI: 10.1016/j.wasman.2016.09.046
ISSN/ISBN:1879-2456 (Electronic) 0956-053X (Linking)
Abstract:"Gaseous emissions and ash obtained in the combustion of furniture waste have been studied, with particular emphasis on the emissions of hazardous pollutants, such as PCDD/Fs and dl-PCBS. Two different combustion procedures were carried out, one of them in a conventional residential stove (without an automatic control of combustion air and bad mixing of combustion gases with air), and the other in a laboratory-scale reactor (operating under substoichiometric conditions). Three different experiments were carried out in the residential stove, in which the gaseous emissions and ashes obtained were analysed. The fuel burnt out in two of the experiments was furniture wood waste and in one of the experiments, the fuel burnt out was briquettes composed of a mixture of furniture wood with 10wt.% of polyurethane foam. One of the purposes of these experiments was the evaluation of the possible inhibition effect of the higher nitrogen content on the formation of PCDD/Fs. Slight inhibition of the PCDD/F formation was found although, it is noteworthy that the lowest yield of PAHs, volatile and semi-volatile compounds were obtained in the combustion of these briquettes. In all experiments, the emission factors of polychlorinated dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls (PCDD/Fs and dl-PCBs) were between 29 and 74ng WHO-TEQ/kg sample burnt, lower than that obtained by other authors in the burning of pine needles and cones. PCDD/Fs and dl-PCBs emissions from furniture wood waste combustion were also analysed in the laboratory scale reactor at 850 degrees C and the results were compared with the values obtained from the combustion of solid wood (untreated wood). The total equivalent toxicity obtained was 21.1ng WHO-TEQ/kg sample for combustion of furniture wood waste, which is low in comparison with those obtained for other waste combustion in similar conditions. In the laboratory scale reactor, PCDFs were the dominant compounds in the profiles of PCDD/Fs, by contrast, in the combustion in the residential stove, the majority compounds were PCDDs, due to the different operation conditions"
Keywords:Combustion Fs Furniture waste Nitrogenated compounds Organic pollutants PCBs Pcdd;
Notes:"PubMed-not-MEDLINEMoreno, Ana Isabel Font, Rafael Conesa, Juan A eng 2016/10/09 Waste Manag. 2016 Dec; 58:299-308. doi: 10.1016/j.wasman.2016.09.046. Epub 2016 Oct 4"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 23-11-2024