| Title: | Emissions and Char Quality of Flame-Curtain 'Kon Tiki' Kilns for Farmer-Scale Charcoal/Biochar Production |
| Author(s): | Cornelissen G; Pandit NR; Taylor P; Pandit BH; Sparrevik M; Schmidt HP; |
| Address: | "Norwegian Geotechnical Institute (NGI), Oslo, Norway. Institute for Environmental Sciences (IMV), University of Life Sciences (NMBU), As, Norway. Nepal Agroforestry Foundation (NAF), Kathmandu, Nepal. Ithaka Institute for Carbon Strategies, Ancienne Eglise 9, Arbaz, Switzerland. Department of Industrial Economics and Technology Management, Norwegian University of Technology, Trondheim, Norway" |
| DOI: | 10.1371/journal.pone.0154617 |
| ISSN/ISBN: | 1932-6203 (Electronic) 1932-6203 (Linking) |
| Abstract: | "FLAME CURTAIN BIOCHAR KILNS: Pyrolysis of organic waste or woody materials yields charcoal, a stable carbonaceous product that can be used for cooking or mixed into soil, in the latter case often termed 'biochar'. Traditional kiln technologies for charcoal production are slow and without treatment of the pyrolysis gases, resulting in emissions of gases (mainly methane and carbon monoxide) and aerosols that are both toxic and contribute to greenhouse gas emissions. In retort kilns pyrolysis gases are led back to a combustion chamber. This can reduce emissions substantially, but is costly and consumes a considerable amount of valuable ignition material such as wood during start-up. To overcome these problems, a novel type of technology, the Kon-Tiki flame curtain pyrolysis, is proposed. This technology combines the simplicity of the traditional kiln with the combustion of pyrolysis gases in the flame curtain (similar to retort kilns), also avoiding use of external fuel for start-up. BIOCHAR CHARACTERISTICS: A field study in Nepal using various feedstocks showed char yields of 22 +/- 5% on a dry weight basis and 40 +/- 11% on a C basis. Biochars with high C contents (76 +/- 9%; n = 57), average surface areas (11 to 215 m(2) g(-1)), low EPA16-PAHs (2.3 to 6.6 mg kg(-1)) and high CECs (43 to 217 cmolc/kg)(average for all feedstocks, mainly woody shrubs) were obtained, in compliance with the European Biochar Certificate (EBC). GAS EMISSION FACTORS: Mean emission factors for the flame curtain kilns were (g kg(-1) biochar for all feedstocks); CO2 = 4300 +/- 1700, CO = 54 +/- 35, non-methane volatile organic compounds (NMVOC) = 6 +/- 3, CH4 = 30 +/- 60, aerosols (PM10) = 11 +/- 15, total products of incomplete combustion (PIC) = 100 +/- 83 and NOx = 0.4 +/- 0.3. The flame curtain kilns emitted statistically significantly (p<0.05) lower amounts of CO, PIC and NOx than retort and traditional kilns, and higher amounts of CO2. IMPLICATIONS: With benefits such as high quality biochar, low emission, no need for start-up fuel, fast pyrolysis time and, importantly, easy and cheap construction and operation the flame curtain technology represent a promising possibility for sustainable rural biochar production" |
| Keywords: | Air Pollutants Carbon Dioxide/analysis Carbon Monoxide *Charcoal Farmers Gases/analysis Methane Nepal Soil/chemistry Wood/chemistry; |
| Notes: | "MedlineCornelissen, Gerard Pandit, Naba Raj Taylor, Paul Pandit, Bishnu Hari Sparrevik, Magnus Schmidt, Hans Peter eng Research Support, Non-U.S. Gov't 2016/05/19 PLoS One. 2016 May 18; 11(5):e0154617. doi: 10.1371/journal.pone.0154617. eCollection 2016" |
