Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractSex differences in scent-marking in sifaka: Mating conflict or male services?    Next AbstractThe role of kairomones and other behavioral chemicals in host finding by parasitic insects »

Environ Monit Assess


Title:Soil sampling and analysis for volatile organic compounds
Author(s):Lewis TE; Crockett AB; Siegrist RL;
Address:"Forestry Sciences Laboratory, U.S. Bureau of Land Management, 3041 Cornwallis Road, 27709, Research Triangle Park, NC, USA"
Journal Title:Environ Monit Assess
Year:1994
Volume:30
Issue:3
Page Number:213 - 246
DOI: 10.1007/BF00546202
ISSN/ISBN:0167-6369 (Print) 0167-6369 (Linking)
Abstract:"Concerns over data quality have raised many questions related to sampling soils for volatile organic compounds (VOCs). This paper was prepared in response to some of these questions and concerns expressed by Remedial Project Managers (RPMs) and On-Scene Coordinators (OSCs). The following questions are frequently asked: 1. Is there a specific device suggested for sampling soils for VOCs? 2. Are there significant losses of VOCs when transferring a soil sample from a sampling device (e.g., split spoon) into the sample container? 3. What is the best method for getting the sample from the split spoon (or other device) into the sample container? 4. Are there smaller devices such as subcore samplers available for collecting aliquots from the larger core and efficiently transferring the sample into the sample container? 5. Are certain containers better than others for shipping and storing soil samples for VOC analysis? 6. Are there any reliable preservation procedures for reducing VOC losses from soil samples and for extending holding times? Guidance is provided for selecting the most effective sampling device for collecting samples from soil matrices. The techniques for sample collection, sample handling, containerizing, shipment, and storage described in this paper reduce VOC losses and generally provide more representative samples for volatile organic analyses (VOA) than techniques in current use. For a discussion on the proper use of sampling equipment the reader should refer to other sources (Acker, 1974; U.S. EPA, 1983; U.S. EPA, 1986a).Soil, as referred to in this report, encompasses the mass (surface and subsurface) of unconsolidated mantle of weathered rock and loose material lying above solid rock. Further, a distinction must be made as to what fraction of the unconsolidated material is soil and what fraction is not. The soil component here is defined as all mineral and naturally occurring organic material that is 2 mm or less in size. This is the size normally used to differentiate between soils (consisting of sands, silts, and clays) and gravels.Although numerous sampling situations may be encountered, this paper focuses on three broad categories of sites that might be sampled for VOCs: 1. Open test pit or trench. 2. Surface soils (<5 ft in depth). 3. Subsurface soils (>5 ft in depth)"
Keywords:
Notes:"PubMed-not-MEDLINELewis, T E Crockett, A B Siegrist, R L eng Netherlands 1994/05/01 Environ Monit Assess. 1994 May; 30(3):213-46. doi: 10.1007/BF00546202"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 12-12-2024