Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractParticle-phase chemistry of secondary organic material: modeled compared to measured O:C and H:C elemental ratios provide constraints    Next AbstractVariation behavior of organic compounds in melamine-urea-formaldehyde impregnated bond paper in different pyrolysis stages »

Environ Res


Title:Vertical macro-channel modification of a flexible adsorption board with in-situ thermal regeneration for indoor gas purification to increase effective adsorption capacity
Author(s):Chen Q; Liu F; Mo J;
Address:"Department of Building Science, Tsinghua University, Beijing, 100084, China; Beijing Key Laboratory of Indoor Air Quality Evaluation and Control, Beijing, 100084, China. School of Environment and Energy Engineering, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China. Department of Building Science, Tsinghua University, Beijing, 100084, China; Beijing Key Laboratory of Indoor Air Quality Evaluation and Control, Beijing, 100084, China. Electronic address: mojinhan@tsinghua.edu.cn"
Journal Title:Environ Res
Year:2021
Volume:20200924
Issue:
Page Number:110218 -
DOI: 10.1016/j.envres.2020.110218
ISSN/ISBN:1096-0953 (Electronic) 0013-9351 (Linking)
Abstract:"Adsorption has been used widely to remove indoor volatile organic compounds (VOCs). However, the large diffusion resistance inside traditional granular adsorbents renders a low VOC adsorption rate. This study proposes a modified method to achieve the rapid diffusion into the adsorbent during the initial adsorption period. A thin and flexible adsorption board with a layer of adsorbent coated on a heating film was prepared for in-situ adsorption and regeneration. Then, regular, vertical macro-channels through the adsorption board were fabricated by laser drilling to enhance mass transfer inside the board. Experimental results demonstrated that after modification, the penetration times for formaldehyde and xylene extended from 3.8 to 6.2 h, and from 62 to 99 h, respectively. The effective adsorption capacity of the modified board had increased by a multiple of two for formaldehyde and 1.8 for xylene. A mathematical model was developed and experimentally validated to evaluate the modification effect for more adsorbent-pollutant pairs. The results showed that the amplification of effective adsorption capacity was positively correlated with the Da/(K.De) parameter; this is the diffusion resistance ratio prior to and following the modification. A spectrogram of adsorbent-pollutant pairs was plotted to guide the modification. This simple macro-channel modification of the adsorption board may be used as an alternative design for adsorption applications in indoor air purification"
Keywords:"Adsorption *Air Pollution, Indoor Formaldehyde *Volatile Organic Compounds/analysis Activated carbon Air cleaning Breakthrough curve Regenerative adsorbent;"
Notes:"MedlineChen, Qiwei Liu, Fang Mo, Jinhan eng Research Support, Non-U.S. Gov't Netherlands 2020/09/28 Environ Res. 2021 Jan; 192:110218. doi: 10.1016/j.envres.2020.110218. Epub 2020 Sep 24"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 03-07-2024