Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractSwarming mechanisms in the yellow fever mosquito: aggregation pheromones are involved in the mating behavior of Aedes aegypti    Next AbstractPredicting U.S. Residential Building Energy Use and Indoor Pollutant Exposures in the Mid-21st Century »

Environ Sci Technol


Title:Using microwave heating to improve the desorption efficiency of high molecular weight VOC from beaded activated carbon
Author(s):Fayaz M; Shariaty P; Atkinson JD; Hashisho Z; Phillips JH; Anderson JE; Nichols M;
Address:"daggerUniversity of Alberta, Department of Civil and Environmental Engineering, Edmonton, AB T6G 2W2, Canada. double daggerEnvironmental Quality Office, Ford Motor Company, Dearborn, Michigan 48126, United States. section signResearch and Advanced Engineering, Ford Motor Company, Dearborn, Michigan 48121 United States"
Journal Title:Environ Sci Technol
Year:2015
Volume:20150313
Issue:7
Page Number:4536 - 4542
DOI: 10.1021/es505953c
ISSN/ISBN:1520-5851 (Electronic) 0013-936X (Linking)
Abstract:"Incomplete regeneration of activated carbon loaded with organic compounds results in heel build-up that reduces the useful life of the adsorbent. In this study, microwave heating was tested as a regeneration method for beaded activated carbon (BAC) loaded with n-dodecane, a high molecular weight volatile organic compound. Energy consumption and desorption efficiency for microwave-heating regeneration were compared with conductive-heating regeneration. The minimum energy needed to completely regenerate the adsorbent (100% desorption efficiency) using microwave regeneration was 6% of that needed with conductive heating regeneration, owing to more rapid heating rates and lower heat loss. Analyses of adsorbent pore size distribution and surface chemistry confirmed that neither heating method altered the physical/chemical properties of the BAC. Additionally, gas chromatography (with flame ionization detector) confirmed that neither regeneration method detectably altered the adsorbate composition during desorption. By demonstrating improvements in energy consumption and desorption efficiency and showing stable adsorbate and adsorbent properties, this paper suggests that microwave heating is an attractive method for activated carbon regeneration particularly when high-affinity VOC adsorbates are present"
Keywords:Alkanes/*chemistry Charcoal/*chemistry *Heating *Microwaves Volatile Organic Compounds/*chemistry;
Notes:"MedlineFayaz, Mohammadreza Shariaty, Pooya Atkinson, John D Hashisho, Zaher Phillips, John H Anderson, James E Nichols, Mark eng Research Support, Non-U.S. Gov't 2015/03/10 Environ Sci Technol. 2015 Apr 7; 49(7):4536-42. doi: 10.1021/es505953c. Epub 2015 Mar 13"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 22-11-2024