| Title: | Workplace field testing of the pressure drop of particulate respirators using welding fumes |
| Address: | "Institute of Health and Environment, Department of Environmental Health, School of Public Health, Seoul National University, Gwanak-gu, Seoul, South Korea" |
| ISSN/ISBN: | 1475-3162 (Electronic) 0003-4878 (Linking) |
| Abstract: | "In a previous study, we concluded that respirator testing with a sodium chloride aerosol gave a conservative estimate of filter penetration for welding fume aerosols. A rapid increase in the pressure drop (PD) of some respirators was observed as fumes accumulated on the filters. The present study evaluated particulate respirator PD based on workplace field tests. A field PD tester was designed and validated using the TSI 8130 Automatic Filter Tester, designed in compliance with National Institute for Occupational and Safety and Health regulation 42 CFR part 84. Three models (two replaceable dual-type filters and one replaceable single-type filter) were evaluated against CO(2) gas arc welding on mild steel in confined booths in the workplace. Field tests were performed under four airborne concentrations (27.5, 15.4, 7.9, and 2.1 mg m(-3)). The mass concentration was measured by the gravimetric method, and number concentration was monitored using P-Trak (Model 8525, TSI, USA). Additionally, photos and scanning electron microscopy-energy dispersive X-ray spectroscopy were used to visualize and analyze the composition of welding fumes trapped in the filters. The field PD tester showed no significant difference compared with the TSI tester. There was no significant difference in the initial PD between laboratory and field results. The PD increased as a function of fume load on the respirator filters for all tested models. The increasing PD trend differed by models, and PD increased rapidly at high concentrations because greater amount of fumes accumulated on the filters in a given time. The increase in PD as a function of fume load on the filters showed a similar pattern as fume load varied for a particular model, but different patterns were observed for different models. Images and elemental analyses of fumes trapped on the respirator filters showed that most welding fumes were trapped within the first layer, outer web cover, and second layer, in order, while no fumes were observed beneath the fourth layer of the tested respirators. The current findings contribute substantially to our understanding of respirator PD in the presence of welding fumes" |
| Keywords: | "Air Filters Humans Inhalation Exposure/adverse effects/*analysis Microscopy, Electron, Scanning Occupational Exposure/adverse effects/analysis Respiratory Protective Devices/*statistics & numerical data Spectrometry, X-Ray Emission *Welding Workplace;" |
| Notes: | "MedlineCho, Hyun-Woo Yoon, Chung-Sik eng Research Support, Non-U.S. Gov't England 2012/04/28 Ann Occup Hyg. 2012 Oct; 56(8):948-58. doi: 10.1093/annhyg/mes015. Epub 2012 Apr 26" |
