Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract[Treatment of Flue Gas from Sludge Drying Process by A Thermophilic Biofilter]    Next AbstractSelective Detection of Ethylene by MoS(2)-Carbon Nanotube Networks Coated with Cu(I)-Pincer Complexes »

ACS Appl Mater Interfaces


Title:Surface Functionalization of Layered Molybdenum Disulfide for the Selective Detection of Volatile Organic Compounds at Room Temperature
Author(s):Chen WY; Yen CC; Xue S; Wang H; Stanciu LA;
Address:"Department of Materials Science and Engineering , National Tsing Hua University , Hsinchu 30013 , Taiwan"
Journal Title:ACS Appl Mater Interfaces
Year:2019
Volume:20190906
Issue:37
Page Number:34135 - 34143
DOI: 10.1021/acsami.9b13827
ISSN/ISBN:1944-8252 (Electronic) 1944-8244 (Linking)
Abstract:"Semiconducting two-dimensional (2D) transition-metal dichalcogenides (TMDCs) are considered promising sensing materials due to the high surface-to-volume ratio and active sensing sites. However, the reported strategies for 2D TMDCs toward sensing of volatile organic compounds (VOCs) present with some drawbacks. These include high operation temperatures, low gas response, and complex fabrication, limiting the development of room-temperature gas sensors. In this study, 2D MoS(2) nanoflakes were prepared by liquid-phase exfoliation, and their surface was functionalized with Au nanoparticles (NPs) through a facile solution mixing method. MoS(2) decorated with Au NPs with an average size of 10 nm was used as a material platform for an electrochemical sensor to detect a wide variety of VOCs at room temperature. Through dynamic sensing tests, the enhancement of gas-sensing performance in terms of response and selectivity, especially in detecting oxygen-based VOCs (acetone, ethanol, and 2-propanol), was demonstrated. After Au functionalization, the response of the gas sensor to acetone improved by 131% (changing from 13.7% for pristine MoS(2) to 31.6% for MoS(2)-Au(0.5)). Sensing tests under various relative humidity values (10-80%), bending or long-term conditions, indicated the sound robustness and flexibility of the sensor. Density functional theory simulations suggested that the adsorption energy of VOC molecules on MoS(2)-Au is significantly higher than that on pristine MoS(2), contributing to the gas-sensing enhancement; a VOC-sensing mechanism for Au-decorated MoS(2) nanoflakes was proposed for the first time for the highly sensitive and selective detection of oxygen-based VOCs"
Keywords:gas sensor gold nanoparticle liquid-phase exfoliation molybdenum disulfide surface functionalization volatile organic compound;
Notes:"PubMed-not-MEDLINEChen, Winston Yenyu Yen, Chao-Chun Xue, Sichuang Wang, Haiyan Stanciu, Lia A eng 2019/08/28 ACS Appl Mater Interfaces. 2019 Sep 18; 11(37):34135-34143. doi: 10.1021/acsami.9b13827. Epub 2019 Sep 6"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 22-11-2024