Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractCarbon isotope fractionation of benzene and toluene by progressive evaporation    Next AbstractGraphite microparticles as coatings for quartz crystal microbalance-based gas sensors »

Environ Sci Technol


Title:Electrochemical Oxidation-Membrane Distillation Hybrid Process: Utilizing Electric Resistance Heating for Distillation and Membrane Defouling through Thermal Activation of Anodically Formed Persulfate
Author(s):Shin YU; Yun ET; Kim J; Lee H; Hong S; Lee J;
Address:"Civil, Environmental, and Architectural Engineering , Korea University , Seoul 136-701 , Korea. Energy Environmental Policy and Technology, Green School , Korea University-KIST , Seoul 136-701 , Korea"
Journal Title:Environ Sci Technol
Year:2020
Volume:20200124
Issue:3
Page Number:1867 - 1877
DOI: 10.1021/acs.est.9b05141
ISSN/ISBN:1520-5851 (Electronic) 0013-936X (Linking)
Abstract:"This study reports distillation-based salt removal by Ohmic heating in a hybrid process, in which electrochemical oxidation (EO) and direct contact membrane distillation (DCMD) are performed sequentially. In addition to anodically destructing the organics, the hybrid process also separated the sulfate-based electrolytes from treated water through distillation, without consuming external energy, owing to the temperature of the aqueous sulfate solution being elevated to 70 degrees C via resistive heating. The hybrid process treated organic compounds in a nonselective fashion, whereas DCMD alone did not completely reject (semi)volatile organics. Integrating EO with DCMD made the hybrid process resistant toward the wetting phenomenon; the process exhibited a steady distillate flux and salt rejection as the initial loading of amphiphilic sodium dodecyl sulfate was increased to 0.3 mM. Anodic persulfate formation from the sulfate and Ohmic heating caused an in situ yield of the sulfate radical in the feed solution; this eliminated membrane fouling, according to the observation that the water flux, which was drastically reduced upon adding alginate, was recovered immediately after an electric current was applied. The hybrid process concurrently decomposed spiked organics and removed naturally present inorganic ions in actual flue gas desulfurization wastewater, without an external supply of electrolyte and heat energy"
Keywords:"*Distillation Electric Impedance Heating Membranes, Artificial *Water Purification;"
Notes:"MedlineShin, Yong-Uk Yun, Eun-Tae Kim, Junghyun Lee, Hongshin Hong, Seungkwan Lee, Jaesang eng Research Support, Non-U.S. Gov't 2020/01/15 Environ Sci Technol. 2020 Feb 4; 54(3):1867-1877. doi: 10.1021/acs.est.9b05141. Epub 2020 Jan 24"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 22-11-2024