Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract"Hydrothermal Synthesis of Rare-Earth Modified Titania: Influence on Phase Composition, Optical Properties, and Photocatalytic Activity"    Next AbstractEffects of replacement partial sodium chloride on characteristic flavor substances of bacon during storage based on GCxGC-MS and non-targeted metabolomics analyses »

Wei Sheng Yan Jiu


Title:[Determination of volatile organic compounds in workplace by portable gas-chromatography]
Author(s):Rua Z; Tang H; Liu D; Zhu H; Pan J; Zou W; Qian Y;
Address:
Journal Title:Wei Sheng Yan Jiu
Year:2016
Volume:45
Issue:2
Page Number:268 - 272
DOI:
ISSN/ISBN:1000-8020 (Print) 1000-8020 (Linking)
Abstract:"OBJECTIVE: To establish a portable gas chromatography (GC) method for the on-site rapid determination of epoxyethane, furan, dichloromethane, benzene, toluene in workplace. METHODS: By using dynamic dilutor, the volatile organic compounds (VOCs) standard gas was prepared and drawn to the capillary column of GC (PID) for separation and analysis. Based on the retention time and peak area, the VOCs was identified and quantified. RESULTS: At the conditions of 60 degrees C column temperature and 9psi pre-pressure, The five VOCs were well separated. Good linear ranges were obtained within the ranges of 0.45 - 90.72 mg/m3 for epoxyethane, 0.22 - 44.50 mg/m3 for furan, 2.19 - 437.4 mg/m3 for dichloromethane, 0.32 - 13.29 mg/m3 for benzene, 0.38 - 15.68 mg/m3 for toluene, respectively. The correlation coefficient was not less than 0.999. The detection limits were 0.03, 0.04, 0.2, 0.008 and 0.03 mg/m3, respectively. The RSD were 0.79% - 2.4%, 1.5% - 1.9%, 0.97% - 1.8%, 2.3% - 3.2% and 3.4% - 4.6%, respectively. The average recovery were 101.4% - 108.4% 85.49% - 94.98%, 97.78% - 106.2%, 99.29% - 103.5% and 95.54% - 101.7% respectively. By using the 7890A GC method, the relative tolerance for the same gas samples were 0.091% - 8.8% for epoxyethane, 3.8% - 6.7% for furan, 0.77% - 9.4% for dichloromethane, 0.24% - 1.6% for benzene, 0.31% - 8.0% for toluene. CONCLUSION: The method is portable, accurate, sensitive, rapid, and exhibits good separation and anti-interference ability. This method is suitable for the rapid detection of VOCs in workplace and also provides reference VOC detection method for the occupational health standard"
Keywords:"Air Pollutants, Occupational/*analysis Benzene/analysis Chromatography, Gas Furans/analysis Methylene Chloride/analysis Toluene/analysis Volatile Organic Compounds/*analysis *Workplace;"
Notes:"MedlineRua, Zheng Tang, Hongfang Liu, Danhua Zhu, Haibao Pan, Ji Zou, Wu Qian, Yaling chi China 2016/06/16 Wei Sheng Yan Jiu. 2016 Mar; 45(2):268-72"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 22-11-2024