Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractVolatile Organic Compounds in Mainstream Smoke of Sixty Domestic Little Cigar Products    Next AbstractVolatile interaction between undamaged plants affects tritrophic interactions through changed plant volatile emission »

J Hazard Mater


Title:Removal of hazardous chlorinated VOCs over Mn-Cu mixed oxide based catalyst
Author(s):Vu VH; Belkouch J; Ould-Dris A; Taouk B;
Address:"Laboratoire de Transformations Integrees de la Matiere Renouvelable, EA 4297, Universite de Technologie de Compiegne, 60205 Compiegne Cedex, France"
Journal Title:J Hazard Mater
Year:2009
Volume:20090410
Issue:1-Mar
Page Number:758 - 765
DOI: 10.1016/j.jhazmat.2009.04.010
ISSN/ISBN:1873-3336 (Electronic) 0304-3894 (Linking)
Abstract:"MnCuO(x)/TiO(2) supported catalyst was synthesized by the incipient wetness impregnation method. The catalyst was then tested for the oxidation of chlorobenzene (CB) used as a Cl-VOC model. The results showed that MnCuO(x)/TiO(2) is very active for CB oxidation since a total conversion (exclusively into H(2)O, CO(2) and Cl(2)) was reached at 350 degrees C without formation of any other harmful organic compounds and no catalyst deactivation was observed. This performance was attributed to the formation Mn(1.6)Cu(1.4)O(4) spinel phase. However, at lower temperatures, some deactivation occurred before a steady-state is reached. At 300 degrees C, the CB conversion decreased and stabilised at 75% after 5h and a small amount of HCl and traces of CO were detected. The reason why HCl was not detected at temperatures higher than 350 degrees C was explained by Deacon reaction. SEM/EDS analysis revealed the presence of chlorine uniformly dispersed on the catalyst surface. The formation of chlorinated compound (MnCuO(x-a)Cl(2a)/TiO(2)), which is presumed to be responsible of the catalyst partial deactivation, was confirmed by other analysis experiments (TG/DTA, TPR). The catalyst regeneration under air at 350 degrees C allowed the system to recover the initial activity in spite of the fact that the chlorine was not completely removed from the catalyst"
Keywords:Catalysis Chlorobenzenes/chemistry/isolation & purification Copper/*chemistry Manganese Compounds/*chemistry Oxidation-Reduction Oxides/*chemistry Temperature Titanium Volatile Organic Compounds/chemistry/*isolation & purification;
Notes:"MedlineVu, Van Hinh Belkouch, Jamal Ould-Dris, Aissa Taouk, Bechara eng Evaluation Study Netherlands 2009/05/05 J Hazard Mater. 2009 Sep 30; 169(1-3):758-65. doi: 10.1016/j.jhazmat.2009.04.010. Epub 2009 Apr 10"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024