| Title: | New methods to remove volatile organic compounds from post-consumer plastic waste |
| Address: | "Chemical Engineering Department, University of Alicante, San Vicente del Raspeig Road, s/n, 03690 San Vicente del Raspeig, Alicante, Spain. Electronic address: andrea.cabanes@gcloud.ua.es. Chemical Engineering Department, University of Alicante, San Vicente del Raspeig Road, s/n, 03690 San Vicente del Raspeig, Alicante, Spain. Electronic address: andres.fullana@ua.es" |
| DOI: | 10.1016/j.scitotenv.2020.144066 |
| ISSN/ISBN: | 1879-1026 (Electronic) 0048-9697 (Linking) |
| Abstract: | "While the annual European demand for polyolefins is 25 million tonnes, only 3 million tonnes of recycled polyolefins find their place in the market, despite collecting 15 million tonnes of post-consumer polyolefins every year. Brand owners of care products are showing their interest in using post-consumer recycled plastics for their packaging. However, there is a general concern in using these materials, as recycled polymers can contain unwanted substances that may expose the consumer to health risks or make the packaging unattractive. Accordingly, the presence of these contaminants narrows the market opportunity of recycled plastics to applications with low-quality requirements and in which the product is not in direct contact with the consumer. Though mechanical recycling is the most widespread solution presents limitations in terms of decontamination, as only superficial substances are removed. Thereby, the volatile organic compounds (VOCs) migrated to the polymer matrix remain inside. Consequently, there is a need to find a solution to purify recycled plastics and increase their market share. This study focuses on removing VOCs from post-consumer recycled HDPE through two innovative methods applied for the first time in this field, steam stripping and polyethylene glycol (PEG) extraction. The methodology implemented to analyze the volatile organic compounds in HDPE was HS-SPME-GC/MS. Both methods showed a decrease above 70% in the VOCs content compared to extrusion-degassing. Moreover, these were compared to hot air stripping, a new technology developed at an industrial scale for the removal of VOCs. As a result, steam stripping improved efficiency in reducing the overall VOCs compared to hot air stripping. The PEG extraction method lowered the volatile polar compounds further than using hot air stripping. Additionally, none of these technologies modified the HDPE melting flow index" |
| Keywords: | Contaminant Deodorization Nia Odor Polyethylene Smell; |
| Notes: | "PubMed-not-MEDLINECabanes, A Fullana, A eng Netherlands 2020/12/18 Sci Total Environ. 2021 Mar 1; 758:144066. doi: 10.1016/j.scitotenv.2020.144066. Epub 2020 Nov 26" |
