Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract"Sustainable in-well vapor stripping: A design, analytical model, and pilot study for groundwater remediation"    Next AbstractSuppressing antagonistic bioengineering feedbacks doubles restoration success »

Ann Occup Hyg


Title:Respiratory exposure to components of water-miscible metalworking fluids
Author(s):Suuronen K; Henriks-Eckerman ML; Riala R; Tuomi T;
Address:"Department of Occupational Medicine, Finnish Institute of Occupational Health, Topeliuksenkatu 41 a A, 00250 Helsinki, Finland. katri.suuronen@ttl.fi"
Journal Title:Ann Occup Hyg
Year:2008
Volume:20080804
Issue:7
Page Number:607 - 614
DOI: 10.1093/annhyg/men048
ISSN/ISBN:1475-3162 (Electronic) 0003-4878 (Linking)
Abstract:"Water-miscible metalworking fluids (MWFs) are capable of causing respiratory symptoms and diseases. Recently, much emphasis has been put on developing new methods for assessing respiratory exposure to MWF emulsions. The air concentrations of ingredients and contaminants of MWF and inhalable dust were measured in 10 metal workshops in southern Finland. Oil mist was determined by infra red spectroscopy analysis after tetrachloroethylene extraction from the filter. Aldehydes were collected on Sep-Pak chemosorbents and analysed by liquid chromatography. Volatile organic compounds (VOCs) were collected on Tenax adsorbents and analysed by gas chromatography with mass spectrometric detection after thermal desorption. Endotoxins were collected on glass fibre filter and analysed by enzyme-based spectrophotometry, and viable microbes were collected on polycarbonate filter and cultured. Inhalable dust was collected on cellulose acetate filter and quantified gravimetrically. Associations between the different exposures were calculated with Spearman's correlations. The mean concentration of oil mist was 0.14 (range <0.010-0.60) mg m(-3). The mean total concentration of aldehydes was 0.095 (0.026-0.38) mg m(-3), with formaldehyde as the main aldehyde. The average total concentration of VOC was 1.9 (0.34-4.5) mg m(-3) consisting mainly of high-boiling aliphatic hydrocarbons. Several potential sensitizing chemicals such as terpenes were found in small quantities. The concentration of microbial contaminants was low. All the measured air concentrations were below the Finnish occupational exposure limits. The exposure in machine shops was quantitatively dominated by volatile compounds. Additional measurements of MWF components such as aldehydes, alkanolamines and VOCs are needed to get more information on the chemical composition of workshops' air. New air cleaning methods should be introduced, as oil mist separators are insufficient to clean the air of small molecular impurities"
Keywords:"Air Pollutants, Occupational/*analysis Environmental Monitoring/methods Humans Industrial Oils/*analysis Inhalation Exposure/analysis *Metallurgy Occupational Exposure/*analysis Oils, Volatile/analysis Water;"
Notes:"MedlineSuuronen, Katri Henriks-Eckerman, Maj-Len Riala, Riitta Tuomi, Timo eng Research Support, Non-U.S. Gov't England 2008/08/06 Ann Occup Hyg. 2008 Oct; 52(7):607-14. doi: 10.1093/annhyg/men048. Epub 2008 Aug 4"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 26-12-2024