Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractTechnology development in breath microanalysis for clinical diagnosis    Next AbstractVolatile organic compound emissions from wastewater treatment plants in Taiwan: legal regulations and costs of control »

J Environ Sci Health A Tox Hazard Subst Environ Eng


Title:Simulating the emission rate of volatile organic compounds from a quiescent water surface: model development and feasibility evaluation
Author(s):Cheng WH; Chu FS; Liou CY;
Address:"Department of Occupational Safety and Hygiene, Fooyin University, Kaohsiung County, Taiwan, Republic of China. PL031@mail.fy.edu.tw"
Journal Title:J Environ Sci Health A Tox Hazard Subst Environ Eng
Year:2005
Volume:40
Issue:9
Page Number:1701 - 1713
DOI: 10.1081/ese-200067999
ISSN/ISBN:1093-4529 (Print) 1093-4529 (Linking)
Abstract:"Organic solvents are commonly used in industrial manufacturing processes, resulting in large quantities of volatile organic compounds (VOCs) emitted from effluent wastewater treatment facilities. This work presents a novel stainless steel simulator designed for developing a model that estimates VOC emission rates from a quiescent water surface in an open/unaerated basin. The target pollutants were aqueous VOCs: alcohols (ethanol and iso-propanol) and methyl ethyl ketone. Two aromatic hydrocarbons, toluene and benzene, were also used and each mixed with ethanol. A formula, based on penetration theory and the concept of mass balance, was devised for simulating emission rates (N), with the following variables: wind velocity (W) above the air-water interface with a power number of beta, the VOC concentration (Cg*) at equilibrium with aqueous concentration (CL), and the emitted concentration (Cg). Restated, N = kWbetaAS(Cg*-Cg), where k and beta denote dimensionless constants, which were solved herein, and As represents the emission surface area. From the proposed formula, three parameters (CL, water temperature, and W) were controlled during each simulation test to derive k and beta values. To assess the feasibility of the simulation procedures for real water with multiple VOC compositions, a large open neutralization basin was used to measure the VOC emission rate. Comparing the calculated results, respectively using the proposed formula and emission model Water 8 developed by the U.S. EPA in 1985, confirmed that the proposed simulation method was a feasible alternative to Water 8"
Keywords:"Air Pollutants/*analysis Environmental Monitoring/*methods Feasibility Studies *Models, Theoretical Organic Chemicals/*analysis Volatilization Water Pollutants, Chemical/*analysis;"
Notes:"MedlineCheng, Wen-Hsi Chu, Fu-Sui Liou, Chih-Yuan eng Research Support, Non-U.S. Gov't England 2005/09/02 J Environ Sci Health A Tox Hazard Subst Environ Eng. 2005; 40(9):1701-13. doi: 10.1081/ese-200067999"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024