Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractActivated carbon fibers impregnated with Pd and Pt catalysts for toluene removal    Next Abstract[The dynamics of volatile organic acid formation by anaerobic decomposition of organic compounds by microorganisms in methane tanks] »

Environ Technol


Title:Effects of activated carbon fibre-supported metal oxide characteristics on toluene removal
Author(s):Liu ZS; Peng YH; Li WK;
Address:
Journal Title:Environ Technol
Year:2014
Volume:35
Issue:9-Dec
Page Number:1499 - 1507
DOI: 10.1080/09593330.2013.871351
ISSN/ISBN:0959-3330 (Print) 0959-3330 (Linking)
Abstract:"Few studies have investigated the use of activated carbon fibres (ACFs) impregnated with metal oxides for the catalytic oxidation of volatile organic compounds (VOCs). Thus, the effects of the ACF-supported metal oxides on toluene removal are determined in this study. Three catalysts, namely, Ce, Mn, and Cu, two pretreatment solutions NaOH and H2O2, and three reaction temperatures of 250 degrees C, 300 degrees C, and 350 degrees C, were employed to determine toluene removal. The composition and morphology of the catalysts were analysed using Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), inductively coupled plasma (ICP), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectrometer (FTIR), and thermo-gravimetric analyser (TGA) to study the effects of the catalyst's characteristics on toluene removal. The results demonstrated that the metal catalysts supported on the ACFs could significantly increase toluene removal. The Mn/ACFs and Cu/ACFs were observed to be most active in toluene removal at a reaction temperature of 250 degrees C with 10% oxygen content. Moreover, the data also indicated that toluene removal was slightly improved after pretreating the ACFs with NaOH and H2O2. The results suggested that surface-metal loading and the surface characteristics of the ACFs were the determinant parameters for toluene removal. Furthermore, the removal of toluene over Mn/ACFs-H202 decreased when the reaction temperature considered was > 300 degrees C"
Keywords:"Air Pollution/*prevention & control Charcoal/*chemistry Hot Temperature Hydrogen Peroxide Metals/*chemistry Microscopy, Electron, Transmission Oxides/chemistry Photoelectron Spectroscopy Sodium Chloride Spectrophotometry, Atomic Spectroscopy, Fourier Tran;"
Notes:"MedlineLiu, Zhen-Shu Peng, Yu-Hui Li, Wen-Kai eng Research Support, Non-U.S. Gov't England 2014/04/08 Environ Technol. 2014 May-Jun; 35(9-12):1499-507. doi: 10.1080/09593330.2013.871351"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 26-12-2024