Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractPhotocatalytic Removal of Toluene Vapour Pollutant from the Air Using Titanium Dioxide Nanoparticles Supported on the Natural Zeolite    Next AbstractTransforming presumptive forensic testing: in situ identification and age estimation of human bodily fluids »

J Air Waste Manag Assoc


Title:Removal of propylene and butylene as individual compounds with compost and wood chip biofilters
Author(s):Rani M; Sattler ML;
Address:"Department of Civil Engineering, University of Texas at Arlington, Arlington, TX 76019, USA"
Journal Title:J Air Waste Manag Assoc
Year:2011
Volume:61
Issue:5
Page Number:527 - 534
DOI: 10.3155/1047-3289.61.5.527
ISSN/ISBN:1096-2247 (Print) 1096-2247 (Linking)
Abstract:"Propylene and butylene are highly reactive volatile organic compounds (HRVOCs) in terms of ground-level ozone formation. This study examined the effectiveness of biofiltration in removing propylene and butylene as separate compounds. Specific objectives were (1) to measure maximum removal efficiencies for propylene and butylene and the corresponding microbial acclimation times, which will be useful in the design of future biofilters for removal of these compounds; (2) to compare removal efficiencies of propylene and butylene for different ratios of compost/hard wood-chip media; and (3) to identify the microorganisms responsible for propylene and butylene degradation. Two laboratory-scale polyvinyl chloride biofilter columns were filled with 28 in. of biofilter media (compost/wood-chip mixtures of 80:20 and 50:50 ratios). Close to 100% removal efficiency was obtained for propylene for inlet concentrations ranging from 2.9 x 10(4) to 6.3 x 10(4) parts per million (ppm) (232-602 g/m3-hr) and for butylene for inlet concentrations ranging from 91 to 643 ppm (1.7-13.6 g/m3-hr). The microbial acclimation period to attain 100% removal efficiency was 12-13 weeks for both compounds. The lack of similar microbial species in the fresh and used media likely accounts for the long acclimation time required. Both ratios of compost/wood chips (80:20 and 50:50) gave similar results. During the testing, media pH increased slightly from 7.1 to 7.5-7.7. None of the species in the used media that treated butylene were the same as those in the used media that treated propylene, indicating that different microbes are adept at degrading the two compounds"
Keywords:"Air Pollution/*prevention & control Alkenes/analysis/*isolation & purification/*toxicity Bacteria/chemistry Biodegradation, Environmental Biofouling Environmental Monitoring/methods/standards Filtration/*methods/standards Humans Incineration/methods/stand;"
Notes:"MedlineRani, Madhu Sattler, Melanie L eng 2011/05/26 J Air Waste Manag Assoc. 2011 May; 61(5):527-34. doi: 10.3155/1047-3289.61.5.527"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 28-12-2024