Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract"Microbial volatile organic compounds: Antifungal mechanisms, applications, and challenges"    Next AbstractCascading Polymer Macro-Debris Upcycling and Microparticle Removal as an Effective Life Cycle Plastic Pollution Mitigation Strategy »

Int J Environ Res Public Health


Title:Multivariate Statistical Analysis for the Detection of Air Pollution Episodes in Chemical Industry Parks
Author(s):Zhao X; Cheng K; Zhou W; Cao Y; Yang SH;
Address:"College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China. Institute of Zhejiang University-Quzhou, Quzhou 324000, China"
Journal Title:Int J Environ Res Public Health
Year:2022
Volume:20220612
Issue:12
Page Number: -
DOI: 10.3390/ijerph19127201
ISSN/ISBN:1660-4601 (Electronic) 1661-7827 (Print) 1660-4601 (Linking)
Abstract:"Air pollution episodes (APEs) caused by excessive emissions from chemical industry parks (CIPs) have resulted in severe environmental damage in recent years. Therefore, it is of great importance to detect APEs timely and effectively using contaminant measurements from the air quality monitoring network (AQMN) in the CIP. Traditionally, APE can be detected by determining whether the contaminant concentration at any ambient monitoring station exceeds the national environmental standard. However, the environmental standards used are unified in various ambient monitoring stations, which ignores the source-receptor relationship in the CIP and challenges the effective detection of excessive emissions in some scenarios. In this paper, an approach based on a multivariate statistical analysis (MSA) method is proposed to detect the APEs caused by excessive emissions from CIPs. Using principal component analysis (PCA), the spatial relationships hidden among the historical environmental monitoring data are extracted, and the high-dimensional data are projected into only two subspaces. Then, two monitoring indices, T2 and Q, which represent the variability in these subspaces, are utilized to monitor the pollution status and detect the potential APEs in the CIP. In addition, the concept of APE detectability is also defined, and the condition for APE detectability is derived, which explains when the APEs can be detectable. A simulated case for a CIP in Zhejiang province of China is studied to evaluate the performance of this approach. The study indicates that the method can have an almost 100% APE detection rate. The real-world measurements of Total Volatile Organic Compounds (TVOC) at a 10-min time interval from 3 December 2020 approximately 12 December 2020 are also analyzed, and 64 APEs caused by excessive TVOC emissions are detected in a total of 1440 time points"
Keywords:*Air Pollutants/analysis *Air Pollution/analysis Chemical Industry Environmental Monitoring/methods *Volatile Organic Compounds/analysis Hotelling's T2 air pollution detectability excessive emissions principal component analysis squared prediction error Q;
Notes:"MedlineZhao, Xiangyu Cheng, Kuang Zhou, Wang Cao, Yi Yang, Shuang-Hua eng Research Support, Non-U.S. Gov't Switzerland 2022/06/25 Int J Environ Res Public Health. 2022 Jun 12; 19(12):7201. doi: 10.3390/ijerph19127201"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 27-12-2024