Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractNematicidal Volatiles from Bacillus atrophaeus GBSC56 Promote Growth and Stimulate Induced Systemic Resistance in Tomato against Meloidogyne incognita    Next AbstractA new measurement protocol to differentiate sources of halitosis »

J Appl Biomater Funct Mater


Title:The examination of vegetable- and mineral oil-based inks' effects on print quality: Green printing effects with different oils
Author(s):Aydemir C; Yenidogan S; Karademir A; Arman Kandirmaz E;
Address:"1 Department of Printing Technologies, School of Applied Sciences, Marmara University, Istanbul, Turkey. 2 Department of Forest Industry Engineering, Faculty of Forestry, Bursa Technical University, Bursa, Turkey"
Journal Title:J Appl Biomater Funct Mater
Year:2018
Volume:20180404
Issue:3
Page Number:137 - 143
DOI: 10.1177/2280800018764761
ISSN/ISBN:2280-8000 (Electronic) 2280-8000 (Linking)
Abstract:"INTRODUCTION: Printing inks oil selection is related to the desired nature of the varnish in the ink production. Petroleum-derived mineral oils and vegetable oils can be used in offset inks. METHODS: In this study, the behaviors of vegetable- and mineral oil-based inks on uncoated and coated paper surfaces were investigated in terms of printability. Solid tone test prints were done with offset printing of these inks. Print gloss of the printed samples was measured and a light fastness test was implemented on these samples in order to determine the resistance to fading. Absorption behavior and contact angles of the ink-printed films on the test papers were measured with the sessile water drop method depending on time, and surface energies were calculated. RESULTS: On both paper types, linseed-soybean oil-based vegetable ink gave the highest brightness value. The lowest print gloss results on the paper were obtained from soybean oil-based inks. The lowest color change was recorded with mineral oil-based inks on gloss-coated papers. According to the ink-film-surface relation, when the contact angle is high, surface energy decreases and the absorbency of the ink-film is lower. CONCLUSIONS: In this study, the behaviors of vegetable- and mineral oil-based inks on different paper surfaces, and the effect on the quality of printability as well as differences, have been evaluated, taking environmental and health factors into consideration"
Keywords:Green Chemistry Technology *Ink Mineral Oil/*chemistry Plant Oils/*chemistry *Printing Soybean Oil/chemistry Surface Properties Water/chemistry Absorption contact angle printability soy-based ink vegetable oil ink volatile organic compound;
Notes:"MedlineAydemir, Cem Yenidogan, Semiha Karademir, Arif Arman Kandirmaz, Emine eng 2018/04/06 J Appl Biomater Funct Mater. 2018 Jul; 16(3):137-143. doi: 10.1177/2280800018764761. Epub 2018 Apr 4"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 06-07-2024