Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractChemically Stable Metal-Organic Frameworks: Rational Construction and Application Expansion    Next Abstract"Multivariate relationships among sensory, physicochemical parameters, and targeted volatile compounds in commercial red sufus (Chinese fermented soybean curd): Comparison of QDA(R) and Flash Profile methods" »

Waste Manag


Title:Enhancing hydrocarbon production via ex-situ catalytic co-pyrolysis of biomass and high-density polyethylene: Study of synergistic effect and aromatics selectivity
Author(s):He T; Zhong S; Liu C; Shujaa A; Zhang B;
Address:"Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing, Jiangsu 210096, China. Electronic address: 18852898725@163.com. Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing, Jiangsu 210096, China. Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing, Jiangsu 210096, China. Electronic address: bozhang@seu.edu.cn"
Journal Title:Waste Manag
Year:2021
Volume:20210514
Issue:
Page Number:189 - 199
DOI: 10.1016/j.wasman.2021.04.058
ISSN/ISBN:1879-2456 (Electronic) 0956-053X (Linking)
Abstract:"We conducted ex-situ catalytic fast co-pyrolysis (co-CFP) of corn stalk (CS) and high-density polyethylene (HDPE) over HZSM-5 catalyst to enhance the production of hydrocarbons. The effect of pyrolysis temperature and CS-to-HDPE mass ratio (CS/HDPE) on the yield of condensable volatile organic products (CVOPs) and the relative content of hydrocarbons were studied. The synergisms between CS and HDPE were determined based on the difference between the experimental and theoretical CVOP and hydrocarbons content. The results showed that the addition of HDPE significantly promotes the production of CVOPs, reaching the maximum value at 750 degrees C. In the presence of HZSM-5, the CVOP and hydrocarbons production, especially aromatics, were enhanced further, and 650 degrees C and 700 degrees C were the preferable pyrolysis temperature for desired products. Benzene, toluene, and xylenes were the predominant aromatics during the CFP process due to the good shape-selectivity of HZSM-5, contributing to the highest selectivity of C5-C11 compounds in C5+ hydrocarbons. CS/HDPE mass ratio of 1:1 was a critical point for enhancing aromatics yield. CS/HDPE < 1 was the recommended mass ratio for increasing the relative aromatic hydrocarbons content, which increases as the CS/HDPE mass ratio decreases. Meanwhile, we presented the potential reaction pathways between CS and HDPE to explain the synergistic effects during the co-CFP process"
Keywords:Biofuels Biomass Catalysis Hot Temperature Hydrocarbons *Polyethylene *Pyrolysis Carbon selectivity Ex-situ catalytic fast co-pyrolysis Positive synergistic effect Py-GC/MS;
Notes:"MedlineHe, Tengfei Zhong, Siying Liu, Chenhao Shujaa, Awsan Zhang, Bo eng 2021/05/17 Waste Manag. 2021 Jun 1; 128:189-199. doi: 10.1016/j.wasman.2021.04.058. Epub 2021 May 14"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 26-12-2024