« Previous AbstractExhalation pattern changes during fasting and low dose glucose treatment in rats    Next Abstract"Acetate, lactate, propionate, and isobutyrate as electron donors for iron and sulfate reduction in Arctic marine sediments, Svalbard" »

Environ Manage

Title:		ENVIRONMENTAL AUDITING: The Functional Unit in the Life Cycle Inventory Analysis of Degreasing Processes in the Metal-Processing Industry
Author(s):		Finkbeiner M; Hoffmann E; Kreisel G;
Address:		"Friedrich-Schiller-University Jena Institute for Technical Chemistry Lessingstrasse 12 07743 Jena, Germany"
Journal Title:		Environ Manage
Year:		1997
Volume:		21
Issue:		4
Page Number:		635 - 642
DOI:		10.1007/s002679900056
ISSN/ISBN:		1432-1009 (Electronic) 0364-152X (Linking)
Abstract:		"/ In 1986 degreasing processes in the German metal-processing industry contributed about 70,000 t to the emission of chlorinated C1 and C2 hydrocarbons (trichloroethane, trichloroethene, tetrachloroethene, dichloromethane). Measures aiming at the reduction of toxic emissions and ozone depletion potential (ODP) may possibly lead to a shift of environmental impacts towards higher energy consumption, emission of waste water, and volatile organic compounds (VOC) with photochemical oxidant creation potential (POCP). The present article concerns itself with a life cycle assessment of the three main degreasing processes in order to compare their integral environmental impacts with one another. This is supplemented by presenting the methodology of the life cycle inventory life cycle inventory analysis (LCI). Generally, the applicability of the established LCI method can be shown quite clearly. However, some difficulties arise, especially at the stage of the goal definition, as the use of the process and the functional unit cannot be pinned down as easily and neatly as for most other products. The definition of the use of the process and the functional unit is not as straightforward as for most products. Among the potential functional units identified are the mass of removed impurities, cleaning time, cleaning work, percentage of purity, throughput of parts, loads, mass or surface and virtual coefficients. The mass of removed impurities turned out to be the most suitable parameter for measuring the technical performance of degreasing processes. The article discusses background, purpose, scope, system boundaries, target group, process tree and representativeness of the present study.KEY WORDS: Functional unit; Life cycle assessment; Life cycle inventory analysis; Degreasing processes; Metal processing"
Keywords:
Notes:		"PubMed-not-MEDLINEFinkbeiner, M Hoffmann, E Kreisel, G eng 1997/07/01 Environ Manage. 1997 Jul; 21(4):635-42. doi: 10.1007/s002679900056"