| Title: | Breakthrough analysis for filtering facepiece respirators impregnated with activated carbon |
| Author(s): | Clinger JC; O'Shaughnessy PT; |
| Address: | "a Department of Occupational and Environmental Health , The University of Iowa , Iowa City , Iowa" |
| DOI: | 10.1080/15459624.2019.1594838 |
| ISSN/ISBN: | 1545-9632 (Electronic) 1545-9624 (Linking) |
| Abstract: | "Several manufacturers are producing disposable dual-use dust masks that are primarily designed to protect against airborne particulate exposures but that also contain a layer of activated carbon to provide protection against organic vapors (OVs) at levels below permissible exposure levels, referred to as 'nuisance level' by the FFR manufacturers. Industries identified in the literature as commonly having employees exposed to nuisance-level OVs include beautician salons, dry cleaning operations, and pesticide applications. This study investigated the adsorption capabilities of three different dual-use dust masks that contain both filter media to remove particles and activated carbon to capture OVs. The three dual-use dust masks were tested and compared relative to the 50% breakthrough time for two OVs (acetone and perchloroethylene) and one non-carbon-based contaminant gas (ammonia) often found in agricultural settings at nuisance-level amounts. The dual-use dust masks were exposed to 15 ppm and 50 ppm for all 3 compounds, which represented the range of nuisance-level exposure documented in literature. Most tests were conducted at 21 degrees C and 50% relative humidity. A relative humidity level of 95% was also created to compare results under that condition. The non-approved dual-use dust masks were ineffective for all vapors and offered less than 10 min of protection before 50% breakthrough occurred. All dual-use dust masks performed poorly when exposed to ammonia, with breakthrough time less than 7 min at 50 ppm and 10 min at 15 ppm. The approved dual-use dust mask had 50% breakthrough times, for example, of 121 min and 233 min for acetone at 15 ppm and 50 ppm, respectively. The less volatile perchloroethylene took over 400 min to achieve 50% breakthrough at 50 ppm. High relative humidity reduced breakthrough times by up to 70%. These results indicate high variability in performance among dual-use dust masks. Performance is also dependent on gas/vapor volatility and levels of water vapor. However, one model tested, the 3M model 8514, did show promise as an acceptable method for greatly reducing nuisance-level OV exposures" |
| Keywords: | "Acetone/chemistry *Adsorption *Air Pollutants, Occupational Ammonia/chemistry *Charcoal Filtration Humidity Masks Occupational Exposure/prevention & control Respiratory Protective Devices/*standards Tetrachloroethylene/chemistry Breakthrough time dust mas;" |
| Notes: | "MedlineClinger, Jayson C O'Shaughnessy, Patrick T eng P30 ES005605/ES/NIEHS NIH HHS/ T42 OH008491/OH/NIOSH CDC HHS/ Research Support, U.S. Gov't, P.H.S. England 2019/04/24 J Occup Environ Hyg. 2019 Jul; 16(7):423-431. doi: 10.1080/15459624.2019.1594838. Epub 2019 Apr 23" |
