Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractRecent Advances in the Catalytic Oxidation of Volatile Organic Compounds: A Review Based on Pollutant Sorts and Sources    Next AbstractSoil dust as a potential bridge from biogenic volatile organic compounds to secondary organic aerosol in a rural environment »

Sensors (Basel)


Title:Volatile Organic Compound Vapour Measurements Using a Localised Surface Plasmon Resonance Optical Fibre Sensor Decorated with a Metal-Organic Framework
Author(s):He C; Liu L; Korposh S; Correia R; Morgan SP;
Address:"Optics and Photonics Group, Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, UK"
Journal Title:Sensors (Basel)
Year:2021
Volume:20210218
Issue:4
Page Number: -
DOI: 10.3390/s21041420
ISSN/ISBN:1424-8220 (Electronic) 1424-8220 (Linking)
Abstract:"A tip-based fibreoptic localised surface plasmon resonance (LSPR) sensor is reported for the sensing of volatile organic compounds (VOCs). The sensor is developed by coating the tip of a multi-mode optical fibre with gold nanoparticles (size: 40 nm) via a chemisorption process and further functionalisation with the HKUST-1 metal-organic framework (MOF) via a layer-by-layer process. Sensors coated with different cycles of MOFs (40, 80 and 120) corresponding to different crystallisation processes are reported. There is no measurable response to all tested volatile organic compounds (acetone, ethanol and methanol) in the sensor with 40 coating cycles. However, sensors with 80 and 120 coating cycles show a significant redshift of resonance wavelength (up to ~9 nm) to all tested volatile organic compounds as a result of an increase in the local refractive index induced by VOC capture into the HKUST-1 thin film. Sensors gradually saturate as VOC concentration increases (up to 3.41%, 4.30% and 6.18% in acetone, ethanol and methanol measurement, respectively) and show a fully reversible response when the concentration decreases. The sensor with the thickest film exhibits slightly higher sensitivity than the sensor with a thinner film. The sensitivity of the 120-cycle-coated MOF sensor is 13.7 nm/% (R(2) = 0.951) with a limit of detection (LoD) of 0.005% in the measurement of acetone, 15.5 nm/% (R(2) = 0.996) with an LoD of 0.003% in the measurement of ethanol and 6.7 nm/% (R(2) = 0.998) with an LoD of 0.011% in the measurement of methanol. The response and recovery times were calculated as 9.35 and 3.85 min for acetone; 5.35 and 2.12 min for ethanol; and 2.39 and 1.44 min for methanol. The humidity and temperature crosstalk of 120-cycle-coated MOF was measured as 0.5 +/- 0.2 nm and 0.5 +/- 0.1 nm in the humidity range of 50-75% relative humidity (RH) and temperature range of 20-25 degrees C, respectively"
Keywords:localised surface plasmon resonance metal-organic framework optical fibre sensor volatile organic compounds;
Notes:"PubMed-not-MEDLINEHe, Chenyang Liu, Liangliang Korposh, Sergiy Correia, Ricardo Morgan, Stephen P eng MR/R025266/1/MRC_/Medical Research Council/United Kingdom MR/RO25266/1/MRC_/Medical Research Council/United Kingdom Switzerland 2021/03/07 Sensors (Basel). 2021 Feb 18; 21(4):1420. doi: 10.3390/s21041420"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 19-12-2024