Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractSymbionts protect aphids from parasitic wasps by attenuating herbivore-induced plant volatiles    Next AbstractRoot jasmonic acid synthesis and perception regulate folivore-induced shoot metabolites and increase Nicotiana attenuata resistance »

Water Sci Technol


Title:Reuse of drinking water treatment sludge for olive oil mill wastewater treatment
Author(s):Fragoso RA; Duarte EA;
Address:"Department of Biosystems Science and Engineering, Technical University of Lisbon, Tapada da Ajuda, Lisbon, Portugal ritafragoso@isa.utl.pt"
Journal Title:Water Sci Technol
Year:2012
Volume:66
Issue:4
Page Number:887 - 894
DOI: 10.2166/wst.2012.267
ISSN/ISBN:0273-1223 (Print) 0273-1223 (Linking)
Abstract:"Olive mill wastewater (OMW) results from the production of olive oil, which is an important traditional agro-industry in Mediterranean countries. In continuous three-phase centrifugation 1.0-1.2 m(3) of OMW are produced per ton of processed olives. Discharge of OMW is of serious environmental concern due to its high content of organic matter with phytotoxic properties, namely phenolic compounds. Meanwhile, drinking water treatment sludge (DWTS) is produced in high amounts and has long been considered as a waste for landfill. The aim of this work was the assessment of reusing DWTS for OMW treatment. High performance liquid chromatography (HPLC) analysis was carried out to determine the phenolic compounds present and to evaluate if they are recalcitrant. Treatability assays were performed using a dosage of DWTS from 50 to 300 g L(-1). Treatment efficiency was evaluated based on the removal of chemical oxygen demand (COD), biochemical oxygen demand (BOD), total solids (TS), total suspended solids (TSS), total volatile solids (TVS), oil and grease (OG), phenols (total phosphorous (TP) and HPLC fraction). Results from OMW HPLC characterization identified a total of 13 compounds; the major ones were hydroxytyrosol, tyrosol, caffeic acid, p-cumaric acid and oleuropein. Treatability assays led to a maximum reduction of about 90% of some of the phenolic compounds determined by HPLC. Addition of 200-300 g L(-1) of DWTS reduced 40-50% of COD, 45-50% of TP, a maximum of nearly 70% TSS and 45% for TS and TVS. The OG fraction showed a reduction of about 90%, achieved adding 300 g L(-1) od DWTS. This study points out the possibility of establishing an integrated management of OMW and DWTS, contributing to a decrease in the environmental impact of two industrial activities, olive oil production and drinking water treatment"
Keywords:"Biological Oxygen Demand Analysis Drinking Water *Food-Processing Industry Industrial Waste/analysis Olive Oil *Plant Oils Recycling/*methods Waste Disposal, Fluid/*methods Water Pollutants, Chemical/analysis *Water Purification;"
Notes:"MedlineFragoso, R A Duarte, E A eng Research Support, Non-U.S. Gov't England 2012/07/07 Water Sci Technol. 2012; 66(4):887-94. doi: 10.2166/wst.2012.267"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 19-12-2024