Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractPoison and alarm: the Asian hornet Vespa velutina uses sting venom volatiles as an alarm pheromone    Next AbstractProduction of Plant-Associated Volatiles by Select Model and Industrially Important Streptomyces spp »

J Environ Sci (China)


Title:"Synthesis, characterization, and photocatalytic activity of porous La-N-co-doped TiO2 nanotubes for gaseous chlorobenzene oxidation"
Author(s):Cheng Z; Gu Z; Chen J; Yu J; Zhou L;
Address:"College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310014, China. College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310014, China. Electronic address: jchen@zjut.edu.cn"
Journal Title:J Environ Sci (China)
Year:2016
Volume:20160316
Issue:
Page Number:203 - 213
DOI: 10.1016/j.jes.2015.09.026
ISSN/ISBN:1001-0742 (Print) 1001-0742 (Linking)
Abstract:"The photocatalytic oxidation of gaseous chlorobenzene (CB) by the 365nm-induced photocatalyst La/N-TiO2, synthesized via a sol-gel and hydrothermal method, was evaluated. Response surface methodology (RSM) was used to model and optimize the conditions for synthesis of the photocatalyst. The optimal photocatalyst was 1.2La/0.5N-TiO2 (0.5) and the effects of La/N on crystalline structure, particle morphology, surface element content, and other structural characteristics were investigated by XRD (X-ray diffraction), TEM (Transmission Electron Microscopy), FTIR (Fourier transform infrared spectroscopy), UV-vis (Ultraviolet-visible spectroscopy), and BET (Brunauer Emmett Teller). Greater surface area and smaller particle size were produced with the co-doped TiO2 nanotubes than with reference TiO2. The removal of CB was effective when performed using the synthesized photocatalyst, though it was less efficient at higher initial CB concentrations. Various modified Langmuir-Hinshelwood kinetic models involving the adsorption of chlorobenzene and water on different active sites were evaluated. Fitting results suggested that competitive adsorption caused by water molecules could not be neglected, especially for environments with high relative humidity. The reaction intermediates found after GC-MS (Gas chromatography-mass spectrometry) analysis indicated that most were soluble, low-toxicity, or both. The results demonstrated that the prepared photocatalyst had high activity for VOC (volatile organic compounds) conversion and may be used as a pretreatment prior to biopurification"
Keywords:"Air Pollutants/*chemistry Chlorobenzenes/*chemistry *Models, Chemical Nanotubes/*chemistry Oxidation-Reduction Titanium/*chemistry Chlorobenzene Conversion efficiency Kinetic analysis La/N-TiO(2) Photocatalysis;"
Notes:"MedlineCheng, Zhuowei Gu, Zhiqi Chen, Jianmeng Yu, Jianming Zhou, Lingjun eng Netherlands 2016/08/16 J Environ Sci (China). 2016 Aug; 46:203-13. doi: 10.1016/j.jes.2015.09.026. Epub 2016 Mar 16"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 30-11-2024