Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous AbstractThe Relationship between CmADHs and the Diversity of Volatile Organic Compounds of Three Aroma Types of Melon (Cucumis melo)    Next AbstractSuperior Self-Powered Room-Temperature Chemical Sensing with Light-Activated Inorganic Halides Perovskites »

ACS Appl Mater Interfaces


Title:Porous Ga-In Bimetallic Oxide Nanofibers with Controllable Structures for Ultrasensitive and Selective Detection of Formaldehyde
Author(s):Chen H; Hu J; Li GD; Gao Q; Wei C; Zou X;
Address:"Key Laboratory of Automobile Materials, Ministry of Education, College of Materials Science and Engineering, Jilin University , Changchun 130025, P. R. China. State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University , Changchun 130012, P. R. China"
Journal Title:ACS Appl Mater Interfaces
Year:2017
Volume:20170130
Issue:5
Page Number:4692 - 4700
DOI: 10.1021/acsami.6b13520
ISSN/ISBN:1944-8252 (Electronic) 1944-8244 (Linking)
Abstract:"The design of appropriate composite materials with unique surface structures is an important strategy to achieve ideal chemical gas sensing. In this paper, efficient and selective detection of formaldehyde vapor has been realized by a gas sensor based on porous Ga(x)In(2-x)O(3) nanofibers assembled by small building blocks. By tuning the Ga/In atomic ratios in the materials, crystallite phase, nanostructure, and band gap of as-obtained Ga(x)In(2-x)O(3) nanofibers can be rationally altered. This further offers a good opportunity to optimize the gas sensing performances. In particular, the sensor based on porous Ga(0.6)In(1.4)O(3) nanofibers assembled by small nanoparticles ( approximately 4.6 nm) exhibits best sensing performances. Toward 100 ppm formaldehyde, its highest response (R(a)/R(g) = 52.4, at 150 degrees C) is approximately 4 times higher than that of the pure In(2)O(3) (R(a)/R(g) = 13.0, at 200 degrees C). Meanwhile, it has superior ability to selectively detect formaldehyde against other interfering volatile organic compound gases. The significantly improved sensing performance makes the Ga(0.6)In(1.4)O(3) sensor very promising for selective detection of formaldehyde"
Keywords:Ga2O3 In2O3 formaldehyde gas sensor porous nanofibers;
Notes:"PubMed-not-MEDLINEChen, Hui Hu, Jiabo Li, Guo-Dong Gao, Qian Wei, Cundi Zou, Xiaoxin eng 2017/01/14 ACS Appl Mater Interfaces. 2017 Feb 8; 9(5):4692-4700. doi: 10.1021/acsami.6b13520. Epub 2017 Jan 30"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 20-12-2024