Bedoukian   RussellIPM   RussellIPM   Piezoelectric Micro-Sprayer


Home
Animal Taxa
Plant Taxa
Semiochemicals
Floral Compounds
Semiochemical Detail
Semiochemicals & Taxa
Synthesis
Control
Invasive spp.
References

Abstract

Guide

Alphascents
Pherobio
InsectScience
E-Econex
Counterpart-Semiochemicals
Print
Email to a Friend
Kindly Donate for The Pherobase

« Previous Abstract'One-pot' reductive lactone alkylation provides a concise asymmetric synthesis of chiral isoprenoid targets    Next AbstractSPME-Based C(a)-History Method for Measuring SVOC Diffusion Coefficients in Clothing Material »

Environ Sci Technol


Title:Transient Method for Determining Indoor Chemical Concentrations Based on SPME: Model Development and Calibration
Author(s):Cao J; Xiong J; Wang L; Xu Y; Zhang Y;
Address:"Department of Building Science, Tsinghua University , Beijing 100084, China. Beijing Key Laboratory of Indoor Air Quality Evaluation and Control, Beijing 100084, China. School of Mechanical Engineering, Beijing Institute of Technology , Beijing 100081, China. School of Environment and Energy Engineering, Beijing University of Civil Engineering and Architecture , Beijing 100044, China. Department of Civil, Architectural and Environmental Engineering, The University of Texas at Austin , Austin, Texas 78712-1094, United States"
Journal Title:Environ Sci Technol
Year:2016
Volume:20160811
Issue:17
Page Number:9452 - 9459
DOI: 10.1021/acs.est.6b01328
ISSN/ISBN:1520-5851 (Electronic) 0013-936X (Linking)
Abstract:"Solid-phase microextraction (SPME) is regarded as a nonexhaustive sampling technique with a smaller extraction volume and a shorter extraction time than traditional sampling techniques and is hence widely used. The SPME sampling process is affected by the convection or diffusion effect along the coating surface, but this factor has seldom been studied. This paper derives an analytical model to characterize SPME sampling for semivolatile organic compounds (SVOCs) as well as for volatile organic compounds (VOCs) by considering the surface mass transfer process. Using this model, the chemical concentrations in a sample matrix can be conveniently calculated. In addition, the model can be used to determine the characteristic parameters (partition coefficient and diffusion coefficient) for typical SPME chemical samplings (SPME calibration). Experiments using SPME samplings of two typical SVOCs, dibutyl phthalate (DBP) in sealed chamber and di(2-ethylhexyl) phthalate (DEHP) in ventilated chamber, were performed to measure the two characteristic parameters. The experimental results demonstrated the effectiveness of the model and calibration method. Experimental data from the literature (VOCs sampled by SPME) were used to further validate the model. This study should prove useful for relatively rapid quantification of concentrations of different chemicals in various circumstances with SPME"
Keywords:Calibration Dibutyl Phthalate Diffusion *Solid Phase Microextraction *Volatile Organic Compounds;
Notes:"MedlineCao, Jianping Xiong, Jianyin Wang, Lixin Xu, Ying Zhang, Yinping eng Research Support, Non-U.S. Gov't 2016/08/02 Environ Sci Technol. 2016 Sep 6; 50(17):9452-9. doi: 10.1021/acs.est.6b01328. Epub 2016 Aug 11"

 
Back to top
 
Citation: El-Sayed AM 2024. The Pherobase: Database of Pheromones and Semiochemicals. <http://www.pherobase.com>.
© 2003-2024 The Pherobase - Extensive Database of Pheromones and Semiochemicals. Ashraf M. El-Sayed.
Page created on 19-12-2024